Hi, thanks for your replies. Job Done! Many Thanks G.
Thanks for your reply, It will not solve my issue, The lever is brand new NOS. It's the post that is worn, so needs replacing. G.
Hi, trying to tighten up gear change slack got new gear lever but it wobbles on post attached to side cover was wondering how to remove the gear...
Cheers Guys, think I'll try and buy it, Regards G.
Hi Need some help to Identify a XJ750 A seca Japanese market 4k0 with 750 engine From a XJ650 RJ seca 4k0 Please. Engine No. Frame No....
Cheers I take it you just add .de instead of .co.uk
Thanks guys, will strip it this weekend and see how I go, will keep you posted.
Changed plugs all good went for a spin, managed to snap the Speedo Needel, Can they be replaced by an amature Or do I have to send it away, quite...
A few more little jobs to do, would like to know if there are still good examples of these out there or is there some where that repairs them?...
Snap! I did exactly the same thing! Just collecting NOS parts here and there for a rebuild. [ATTACH]
New set of plugs were cheaper than multi meter, so ordered them. Be here in a few days. Went out on the old plugs, ran fine. Happy Days. G....
Funny thing is they came from a bike I could never get to run right, rebuilt carbs shaft seals the lot, still bad, changed carbs no change, then...
Was putting some finishing touches to the xj 650 4kO getting it ready for a run out tomorrow, fingers crossed. So had a set of plugs 100 miles on...
Fitted seat stay and new clip, thought I would thread the bar and put a nyloc nut on for a bit of extra security[ATTACH]
If you talk to chacal @ XJ4EVER, to see if they have the part, I needed some obscure hard to find parts for my 4k0 a mix of second hand new and...
Have you, refitted the spacer inside the drive hub?
Thanks to Len! Hard to find parts! All sorted and made the journey from Atlanta to Scotland in 9 days. Cheers! Len!
Cheers Guys, Thanks for your help, Gary.
I think we have a solution, K-Moe has sorted things out. I've been calling things the wrong name. Sorry! For the confusion, So it's the brake...
Not sure what "nomenclature" means But I suspect your telling me off for callings things by different names.
Did fit a new tyre, Bridgestone BT 45 120/90 18. But the wheel turns Ok, it's the drum plate that will not move, had a think about it earlier and...
All fitted, See Pics. Just new shocks to fit, Gary.
I have now refitted wheel many times and even fitted spare wheel and drum and no difference. Had a think about it and done some rudimental...
Had a look in Haynes: Removal is remove split pin undo spindle nut slacken pinch bolt the displace and withdraw. I assume refitting is reversed....
Many thanks, Will strip it back down tomorrow, and give it another go. Gary.
Driveshaft not connected was answering is it in neutral, solution. I have fitted the spacer honest, when I refitted the rear wheel without the...
Nice try: Driveshaft not connected, Good call, but yes I remembered.
Xj650 4K0 rear drum brake sticking after refitted rear wheel: Place wheel on splines Pushed through rear spindle, washer between spindle and rear...
All sorted: Chacal many Thanks!
Testing signature
Thanks. Message sent.
Wanted, XJ650 RJ Seca 4ko Grab Handle Rhs in good condition. Regards Gary.
Testing picture
Thanks for that high tensile bolts ordered. Gary.
Hi, all Splitting engine cases, and don't have any pullers was wondering What is the size of bolt and thread pitch is needed, to remove the...
Got some goodies engine stand and some engine brackets [ATTACH] [ATTACH] Awaiting cases will keep you posted. (That's if anyone is...
I'm going to fit the US seca Cases as they're the cheapest I can find.
Looks like a total rebuild [ATTACH] [ATTACH] Good Times !
Result 1982 XJ650 Seca USA : 5V2
Hi thanks for the reply, I didn't know there were two types of engine mount. I will read through the ID and Vin Thanks Gary.
I Am Having the Pleasure of rebuilding my Xj 650 RJ Seca 4ko engine. i'm in the UK so current engine number prefix is 4k0- i'm needing replacement...
Sorted was Running Lean No Just, Really Sluggish Yeah a Little Bit Yes I got +4 for 4-1 Exhaust = 4 Add up all the main fuel jet size...
Emulation Tubes Pulled and Cleaned, Needles No Shims, Motad 4-1 Exhaust, New Plug Caps 5k Resistor, Cut Back Leads New Plugs Not R, This is an...
Went Through Everything Again, Stripped Cleaned Bench Sync Etc. Tick-over to 3000 Rpm everything's fine Gets to 3000 Rpm then it wants to rip...
Hi, Just Putting Feelers out For Intrest In XJ650 1980 4k0 has 6 month MOT and Tax It owes me about a 1000 Done Shims, Calipers, Master...
Not Idle Screw, wish it was, Took great Care With Butterfly's (see Pics) will have to strip carbs again.
Got everything back together, color-tuned and balanced Carbs, Went out for a test and got More Issues! Going along Fine Gets to 3000 rpm jumps...
Mikunis on my GsXr the Pins Only Go In / Out One Way, Just Check as The One You Got Loose May be Slack.
Totally, I Get what your Saying, But I Think I'll Burn that Bridge When I Come To It. LOL!
Hi, I've got a 260 if you Still need one.