Hi all, can someone tell me does the 4ko seca YICS engine have a two piece head gasket, I mean does it have a tunnel gasket as well as the full...
Thanks for the reply. Had the head, base and cam cover gaskets replaced and the two copper head stud washers also. I'll drive her on for another...
Absolutely no leak from cam or head gasket definitely coming out from stud bolt number 2 cylinder and trickling out onto fins. I'm at a loss.
ill have a look see at the cam cover again. Thanks.
Sorry I meant just above the BASE GASKET. no oil leaks from anywhere else. I have an oil soak rag in there to soak up the dribble.
Hi everyone. I have an oil leak between cylinders 2 and 3 as you look in from the oil cooler side. Looks like a trickle from where the head stud...
Thanks so will it be Pilot large 80, small 225 and is the hole to be blanked? Thanks again.
thanks, so pilot large will be 80, small 225 and are you saying this hole needs planking?? Thanks
Thank you, while im here, did i read somewhere that the main air and main pilot air jets are wrongly shown fitted in the haynes manual.Thanks.
Hi lads, i've put a 750 seca engine in my maxim, can someone tell me is there supposed to be a plate covering the main air#80 and pilot air#225...