I am getting ready to install two intake cams from the FJ motor in my FJ motor. I have some cam sprockets that are index-able, with the help from...
I looked in my notes and found the last jetting to be, Pilot jet's #15 If you don't go up on these you will be chasing your tail. Main jet's # 1...
My motor builder from back in the day, re- sleeved my cylinders and bored the cases to fit for oversize Honda pistons.
No on the stock boots.
I am selling my 1984 FJ600 carbs that I have set up to run with pods. It comes with the intake boots, no clamps. I only found 2 of the 4 filters...
It is set up with GP shift, same oil, cable is fine, clutch plates are flat.
No linkage. I think it is shifting forks.
What transmission components are likely to be bad? It is hard to find neutral after rebuild on a FJ600?
what is your email address?
How bout $40 plus shipping? Weight may effect price depending if you want brake hub and sprocket assy.
Straight clean wheels with good bearings. 18" rear with brake hub and 19" front. Braced swing arm, upper and lower triple tree, headlight &...
I wonder how much weight that adds?
It have a Katana rear 17," wheel GS500 hub, Early FZR600 swinger.
[ATTACH] Radian swinger bolts right on.
Hey Kickaha, have you replaced your petcock with a non vacuum unit and if so where can I find one?
Hey Ken, have you replaced your petcock with a non vacuum unit and if so where can I find one?
Hey bud, have you replaced your petcock with a non vacuum unit and if so where can I find one?
I have had success with tuning FJ600 carbs with pods. This video only shows aggressive acceleration but was civil in traffic as well.
Keep it open so others can use this as a trouble shooting tool.
Was this issue resolved?
Using anti-seize may give you a false torque value.
No, the only thing original is the TCI.
Great. How do you test them?
Any one have a spare working TCI for the 1988 Yamaha FZ600 or FJ600 I guess will work?
Motor is together, now will it start? Keep them fingers crossed.[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH]
I feel your pain.
You are proly right, I just cant dedicate that much time explaining and all the photos.
But I did find out and photo the differences in the inside...
I'm going to set the cam timing.
They came from a 1978 Suzuki GS 750. They are going on my Radian 600 motor.
Done! Today I am going for the cylinder install.
Cleaning these back up to reinstall.
I ordered a pair of these bad boys today. http://www.yssusa.com/images/Z362%20TRL.jpg
Well actuality, I will be using 1988 FZ600 intake cams for my project re-build.[ATTACH] [ATTACH]
How about an answer for this? Let's say I wanted to run intake cam for the exhaust as well.
Do you shim it the same as the actual intake cam, or...
Double up on spark plug washers to drop compression.
Thanks k-moe but that is of no help, my drum is a, 49A not the 4H7.
There are 6 pin holes and 1 for the dowel. That means 1 hole is empty. The question, what hole has no pin in it? Who has one to look at? [ATTACH]
Got it thanks.
What is the orientation of the dowel pins #4 and #5 in this schematic?
There is one hole out of the 6 that does not get a dowel, witch one?...
I know what an era! Yes Po Boys Restaurant BBQ sauce and $500 Yamaha money for Formula 1[ATTACH] win.
Not the whole time. The bike spent 5 years on the race track and about 15 in boxes.[ATTACH]
Well back in 1982 it was popular to run from the law in my town.
Things are not that way these days. I may have an extra light if you are...
You don't, that's the whole idea.
Mine was clear until I put black tape over it.
I saw that, but still would like to here from him.