Got on it to ride the other day and the pedal wouldn't shift out schemof 1st gear. I could only get it into 1st or neutral. I'm assuming it's a...
The after market Chinese coils that were described on ebay as compatible with xj750s were garbage. They tested at 5.2 ohms primary and 15k ohms...
I bought a set of ignition coils off ebay last week. I tested them with a multi tester and need an opinion of the results. the resistance across...
Someone posted pictures of an Hitachi HSC 32 carburetor cutaway. any links to that ? I saw it a while back now i can't find it. It was in the tech...
I saw a video where a guy blasted carburetor cleaner Through the pilot jet while blocking one of the air jets with a toothpick. Anyone have link...
I'm looking for a good wiring harness for an 82 xj650 maxim. I have a shed full of xj parts and can trade something of roughly equal value or send...
I completed my xj750seca project, looks great. I'll post pics soon. Anyway, I have an xj650 that I almost finished a couple of years ago. The...
Brakes are not locked. the wheel can be pushed around. my question refers to a you tube presenter who demonstrated a way to tell if the dragging...
Are the calipers used on the xj750r seca and the xj750 maxim the same ?
was wondering if the pistons from the xj759 seca calipers are the same as pistons from the calipers of other xj bikes : xj750 maxim, xj650 seca ,...
at what point in the bleeding process is the reservoir cover reinstalled ? can more fluid be added at this point ? Is the proper level of fluid in...
conflicting info on bleeding I'm wanting to fill the lines by gravity. Which is the best position for the lever to allow brake fluid to drain...
Anyone got an xj650 seca kickstand switch in working order ?
82 650 seca. was getting no starter button, checked the wiring to the cutoff and kick stand relays. wiring all good. had lights horn etc. but no...
I've been following directions from the Haynes manual for testing the side stand relay. The test for winding resistance across the two pins in...
has anyone ever posted an ignition wiring schematic for a 650 seca ?
I have an 82 xj650 maxim. It has been sitting for a while. everything was fine when parked. I tried to start it a couple of days ago. Turned the...
I' m looking for a source of rings and pistons for xj bikes 80-84
Anyone have a source for rings, pistons, bearings etc. for xj650s, 750s, secas/maxims. I have several engines I would like to overhaul.
I have several xj750 parts bikes but need a titled frame to assemble all those other parts on. 1981-1983 xj750 maxim. Also need an intact wiring...
Hello all xj lovers. Does anyone have an 82 Sec a 650,non turbo, seat lock ? A key would be nice but I can get a key made if you have one without.
I'm looking into Shipping a bike from Santa Fe to portland. Any tips for a good company for shipping ?
After getting the starter to fire, swapping out a bad cutoff relay, the bike starts up without much enrichment. The xj650 seca rj idles smoothly...
I need an 82 650 seca rj seat lock with a key
I put together my 82 xj650 seca rj out of parts from a variety of sources. I have an oem kickstand switch and a wiring harness from another 650...
I thought I was finished with an 82 xj 650 non turbo seca last fall. I had to let it sit until last week. When I tried to start it, The neutral...
Does anyone have, or know of, an xj 650 parts bike,either Seca or maxim, in the area of New Mexico 750s ok as well. I have two more titled frames...
got my xj650r seca pretty much done. carbs complete, engine in good order. I cleaned the contacts in the handle bar switches and used a multimeter...
I finished this xj650 seca this week thanks to Chacal,Hogfiddles,Jesse Wilson and Simmy for may impossible to find parts
I have a seat lock assembly off a 650 seca. the tumbler is missing. I can opporate the latch by twisting a screwdriver in the slot where the...
I'm looking for the clip, the washer/plate, and the bolt used to fasten an xj650rj seca gas tank
I would like to know if the front brake lines for a 650lj seca turbo are interchangeable with a 650rj seca
I took my 82 650 maxim for a test ride and the front brakes locked.They released when I let pressure off the bleeder. The caliper was spotlessly...
This is an 81 650 maxim that I bought at a swap meet and completely rebuilt in 2015 new or rebuilt clutch, brakes, carbs, valves re-shimmed,...
If you are like me, always on Craigslist or Facebook marketplace looking for xj parts bikes or neglected garage queens for sale, beware of bikes...
Trying once again , Has anyone found a rattle can color that comes close to the metalic grey of a 650rj seca ??
I swapped shims on a 650 maxim last year. Now I'm doing a 650 seca. I forgot which way to rotate the crank shaft with the square nut on the timing...
Does anyone know of a rattle can paint color that comes close to the metalic grey of an 82 xj650 seca
after rebuilding the carbs,wet testing the fuel levels and synching them with vacuum gauges the bike runs well. but I can't lower the idle speed...
I set my floats with a gauge at 17.5 mm. When I did the wet test the fuel levels all were about 5/16" to 3/8" low. What is the ratio for...
I have a couple of carbs in a rack of HCS32 Hitachis with clogged pilot fuel passages. I saw a trick on youtube a while back for blowing them out...
I completed a 1981 650 maxim recently that I had been working on since last year. It ran great and all the electrical components functioned except...
I have an xj650 maxim in my garage that has been sitting for a few months. There was a puddle of oil Underneath. I got it on my lift, pulled the...
I tried everything cheap to fix this, flashers on right flash ok/flashers on left steady. Ok, so what if now I go to the dark unorthodox idea...
The former problem was that the right side flashed ok, front and rear, but on the left only the rear lit and was steady, not flashing. I...
I just completed an 82 xj650 maxim stock build. everything works fine except for the flashers. The right side flashes just fine front and rear but...
I'm looking for an xj650 seca frame w\title. I'm in Santa fe, New Mexico. I,ok pay to ship
I recently completed rebuilding an 81 xj650 maxim. I thought I did a thorough job on the carbs, soaked the stripped bodies in chem dip,blew out...
Hi, i am restoring an xj650 maxim from a variety of aquired parts. I have installed a very clean looking tach included with the instrument...