1. Hello Guest. You have limited privileges and you can't "SEARCH" the forums. Please "Log In" or "Sign Up" for additional functionality. Click HERE to proceed.

xj750 seca front footpegs

Discussion in 'XJ Technical Chat' started by xj gray am I, Mar 3, 2019.

  1. xj gray am I

    xj gray am I New Member

    Messages:
    28
    Likes Received:
    1
    Trophy Points:
    3
    Location:
    south australia
    I am looking to replace the rubbers on my front footpegs (5g2-27413-00-00)on my 82 750rj and I am wondering if any one makes aftermarket rubbers or has anyone removed the rivet and used another footpeg from a common model
     
  2. Toomanybikes

    Toomanybikes Well-Known Member

    Messages:
    2,835
    Likes Received:
    814
    Trophy Points:
    113
    Location:
    Tsawwassen bc
    Check with @chacal at xj4ever.
    Top right corner of page.
     
  3. XJ550H

    XJ550H Well-Known Member Premium Member

    Messages:
    13,199
    Likes Received:
    3,854
    Trophy Points:
    113
    Location:
    Great North Woods
    some new ones on ebay as well
     
  4. Jetfixer

    Jetfixer Well-Known Member

    Messages:
    3,173
    Likes Received:
    1,485
    Trophy Points:
    113
    Location:
    Nothern Indiana
    I drilled out the rivet , bought 2 clevis pins and cotter pins , I found 2 pegs in good condition on eBay and replaced mine . Only thing that you should know is to make sure spring is set right. If you drill the rivet only do the head ,and use a small punch and drive it out.
     
  5. Polock

    Polock Well-Known Member

    Messages:
    9,751
    Likes Received:
    2,093
    Trophy Points:
    113
    Location:
    Beaver Falls, PA
    i heard once bmx bicycle foot pegs from walmart work, i don't know never looked into it
     
  6. chacal

    chacal Moderator Moderator Supporting Vendor Premium Member

    Messages:
    8,866
    Likes Received:
    1,780
    Trophy Points:
    113
    Location:
    The room where it happened
    We do have them in stock, and shipping to Australia is not a problem (but can be pricey).
     
  7. xj gray am I

    xj gray am I New Member

    Messages:
    28
    Likes Received:
    1
    Trophy Points:
    3
    Location:
    south australia
    thanks Chacal, exchange rate, as well as postage is a real problem , might have to scour the wreckers for a foot peg that I can adapt.
    Jetfixer, did you use xj750 pegs or something else?
     
  8. Jetfixer

    Jetfixer Well-Known Member

    Messages:
    3,173
    Likes Received:
    1,485
    Trophy Points:
    113
    Location:
    Nothern Indiana
    I bought 2 off of eBay that were in better condition than mine they were for an 82 XJ750 Seca ....the ones I bought were complete with brackets , but to me it was easier to drill out the rivet than unbolting mount ...
     

Share This Page