1. Some members were not receiving emails sent from XJbikes.com. For example: "Forgot your password?" function to reset your password would not send email to some members. I believe this has been resolved now. Please use "Contact Us" form (see page footer link) if you still have email issues. SnoSheriff

    Hello Guest. You have limited privileges and you can't "SEARCH" the forums. Please "Log In" or "Sign Up" for additional functionality. Click HERE to proceed.

xj750 carb question..

Discussion in 'XJ Technical Chat' started by MadCowInk, Mar 30, 2009.

  1. MadCowInk

    MadCowInk Member

    Messages:
    53
    Likes Received:
    0
    Trophy Points:
    6
    Where exactly are the fuel/air mixture screws located on the hitachi carbs?Is it possible to adjust them while they are on the bike?Photos would be helpful.
     
    MadCowInk, Mar 30, 2009
    #1
  2. chacal

    chacal Moderator Moderator Supporting Vendor Premium Member

    Messages:
    9,189
    Likes Received:
    1,986
    Trophy Points:
    113
    Location:
    The room where it happened
    Very front of the carb body, upper, pointing towards the sky, just to the left (facing forward) of the starter/choke/enrichment "plunger" valve:

    http://www.xjbikes.com/Forums/viewtopic/t=3649.html


    Yes, you can adjust them while they're on the bike, you need a really short, stubby flat-blade screwdriver PROPERLY SIZED to fit the head or you run the real risk of stripping the head, they're soft metal screws, sometimes seized up, and use a really wide slot for such a small screw head!
     
    chacal, Mar 31, 2009
    #2
  3. MadCowInk

    MadCowInk Member

    Messages:
    53
    Likes Received:
    0
    Trophy Points:
    6
    :lol: Awesome, thanks so much. I know what I'm doing tonight!
     
    MadCowInk, Mar 31, 2009
    #3

Share This Page