Maxim X Parts

Hi all,

I have pulled some spare parts from my bike. Here's a link to photos:

http://s558.photobucket.com/albums/ss29/jvswan/Motorcycle/Parts/

Here's what I'd like to get for them:

Airbox alternative - $20 PENDING
Slick PVC alternative if you don't have or don't want an airbox. Fits the Mikuni carbs and puts the two foam filters (included) or two pod filters below the seat. Will run on stock jetting, but is best to rejet.

Instrument cluster - $50
Good condition. Slight fading of red in the tach.

Front seat - $50
Good condition. No tears or rips.

Rear seat - $40
Good condition. No tears or rips.

Rear axle - $12
Good condition, some light rust on pinch-bolt end. Includes castle nut.

Mikuni carbs - $100
Good condition. Clean. Could use some new drain screws, but they can still be turned as needed. They are just kind of buggered up. Could also use another fuel mixture screw. It works, but the top is kind of buggered up. There are some light rust spots on the carb hats. Everything else is in great condition.

4-1 exhaust - $20 PENDING
Was black, is now rusty. The metal is sound. No holes or weak spots that I can detect. Includes a beat up old street bike muffler. If you want a 4-1, this should clean up just fine. I'd get a new muffler, though.

Rear brake shoe plate - $25
In good condition. Some light rust stains where bolted to tension bar. Includes Yamaha brake shoes and springs (which are slightly rusty). I'd recommend new shoes. These shoes have a lot of wear left, but they appear to be stock. These are the brake shoes that have been reported to de-laminate.

I'd prefer PayPal, but will accept a check if you'd like to send me one. Contact me to arrange payment or ask any questions. Shipping will be actual plus $5 for a box and to cover PayPal fees.

That's it for now. I have a lot more. If you're looking for something, let me know. I have an entire bike to part out. I'll get around to listing more parts later this week.

 

dibs on the exhaust and air cleaner pm me thanks

 

IM sent.

 

thanks Jason sent you my address and email

 

That custom PVC intake looks familiar Jason. Have you got the X running good yet?

 

Has anyone bought the carbs yet?

 

Hey Mark! Yours, of course, is running good. Would be better, I think, once I get the airbox on it! LOL I'm still putzing around with my engine, though. Hope to get my valve shims by this weekend so that I can get those things back together and see if it makes a difference. Sheesh!

Billt, carbs are still available. PM if you are interested.

 

Just checking to see if there is any more interest. I'm going to start listing stuff on eBay this weekend.