1. Some members were not receiving emails sent from XJbikes.com. For example: "Forgot your password?" function to reset your password would not send email to some members. I believe this has been resolved now. Please use "Contact Us" form (see page footer link) if you still have email issues. SnoSheriff

    Hello Guest. You have limited privileges and you can't "SEARCH" the forums. Please "Log In" or "Sign Up" for additional functionality. Click HERE to proceed.

Xj 650 Turbo - pressure sensor - make a reading

Discussion in 'XJ Technical Chat' started by pirok, Mar 24, 2010.

  1. pirok

    pirok Member

    Messages:
    137
    Likes Received:
    0
    Trophy Points:
    16
    Location:
    Aarhus, Denmark
    Well I tried to see if the pressure sensor were within specs. The reading on the voltage meter said 3.9 volts but it should be about 2 volts i think.
    Someone who had any experience with that? Is the sensor dead? It do though react when I blow in it. (the reading gets higher)
     

    Attached Files:

    pirok, Mar 24, 2010
    #1
  2. pirok

    pirok Member

    Messages:
    137
    Likes Received:
    0
    Trophy Points:
    16
    Location:
    Aarhus, Denmark
    Re: Xj 650 Turbo - pressure sensor - make a reading?

    Anyone who could make a reading on a running XJ Turbo?
    You just make the reading from the R/W wire comming from the pressure sensor to ground (-), when the ignition is ON.
    (+ on the meter to the R/W wire and - to ground)
     
    pirok, Mar 28, 2010
    #2

Share This Page