1. Some members were not receiving emails sent from XJbikes.com. For example: "Forgot your password?" function to reset your password would not send email to some members. I believe this has been resolved now. Please use "Contact Us" form (see page footer link) if you still have email issues. SnoSheriff

    Hello Guest. You have limited privileges and you can't "SEARCH" the forums. Please "Log In" or "Sign Up" for additional functionality. Click HERE to proceed.

Right side caliper

Discussion in 'XJ Technical Chat' started by Nighthawk, Aug 23, 2010.

  1. Nighthawk

    Nighthawk Member

    Messages:
    93
    Likes Received:
    0
    Trophy Points:
    6
    Location:
    Huber Heights, Ohio
    I've had my 750 Seca brakes off numerous times over the years. I just had my front forks completed overhauled replaced the tubes and springs. Along with the wheel bearing. Now I noticed that the right side caliper is rubbing the brake disk. The opposite disk is centered in the calpier, The right side disk is rubbing hard against outside of the caliper.

    I loosen everything up and still it is rubbing. Pulled the caliper off and took it apart and still rubs. I loosen up the bolt which tightens the axle down still no clearance.

    Hope someone has a idea thanks

    Keith
     
    Nighthawk, Aug 23, 2010
    #1
  2. Nighthawk

    Nighthawk Member

    Messages:
    93
    Likes Received:
    0
    Trophy Points:
    6
    Location:
    Huber Heights, Ohio
    I found where someoen had the same issue back in July but no fix was provided. Somone did respond and said that they loosen the sinch bolt on the axle and moved the fork to make clearance preventing the caliper from draging on the brake disk. Something isnt right. My washers on the caliper are in correct location on the bolts

    thanks
     
    Nighthawk, Aug 23, 2010
    #2

Share This Page