1. Some members were not receiving emails sent from XJbikes.com. For example: "Forgot your password?" function to reset your password would not send email to some members. I believe this has been resolved now. Please use "Contact Us" form (see page footer link) if you still have email issues. SnoSheriff

    Hello Guest. You have limited privileges and you can't "SEARCH" the forums. Please "Log In" or "Sign Up" for additional functionality. Click HERE to proceed.

clutch advice

Discussion in 'Hangout Lounge' started by seca750, Apr 19, 2011.

  1. seca750

    seca750 Member

    Messages:
    113
    Likes Received:
    0
    Trophy Points:
    16
    Location:
    New York
    Hello all! I was looking for any tips before I replace the springs and friction plates in the clutch. I plan on running the bike to get it warmed up, drain the oil then start with the clutch.

    Thanks for any tips!

    SECA750

    P.S.

    Thanks to XJ4Ever for the parts!
     
  2. tskaz

    tskaz Active Member

    Messages:
    1,878
    Likes Received:
    17
    Trophy Points:
    38
    Location:
    Saint Louis, Michigan
    If it's time for an oil change, go ahead and drain it. But if you've changed the oil recently you can just put the bike on the side stand and remove the clutch cover. If it's not over-filled you shouldn't lose any oil.

    Make sure you saturate all the parts with oil
     
  3. seca750

    seca750 Member

    Messages:
    113
    Likes Received:
    0
    Trophy Points:
    16
    Location:
    New York
    Sweet! Thanks for the tips!
     

Share This Page