1983 Maxim 650 Part out

Please see next reply for inventory, thanks!

 

Here's what I still have,

Seat - original cover, good shape.
Rear tire/rim - Bridgestone spitfire, ~10,000km, lots of tread left.
valve cover from 81 750 (same as 650)
SS brake lines (new this season, black in color)
Left handlebar controls (-clutch lever which is all bent and should not be used)
Right handlebar controls, new starter button (missing throttle plastics)
matching tank/helmet/ignition/chain with a couple keys
Shifter lever
Airbox (not sure of removal process)
Airbox beauty chrome
Airbox --> carb joints. pretty new set.
Airbox --> carb joints. originals.
MAC 4-into-1 exhaust (some dents and hole 2 pipe is bent slightly). Should be workable still. Missing a couple nuts.
Front frame reflectors
Left and right hand control clusters (clutch lever is bent -- no throttle plastics)
114 fuel jets (4)
116 fuel jets (4)
intake manifolds, some cracks but ok shape.

Let me know if you're looking for anything else or would like pictures. I'm hoarding TCI/Carbs as I've not checked the ones on the new bike and they're getting pretty rare. Had to swap a few pieces already (axle, valve cover, etc...) Shipping can be a bear down to the states, but maybe something can be worked out.

Marcel

 

are you still selling the parts for the xj650 i need a couple of things and im a newb to the bike world and having a hard time finding what i need and want

 

Yessir, i have some stuff! what were you after and where are you located? Shoot me a PM if you'd like to keep it private

 

Grips?

 

Sorry Bobby, just sent the right hand side grip (w/throttle plastic) to oregon yesterday... the left is not fit for a king, here king, here king...

 

thanks anyways!

 

BUMP

 

Can you ship to the lower 48? If so please shoot me a quote on the exhaust plus shipping to 88101.

 

I can, but it will likely be pricey. Let me send you some pictures before you decide, as they'be been bruised and beaten a little bit. PM me your email address, and i'll get some over to you soon.

Marcel

 

Starter brushes?

 

Just replaced mine last year. Never checked the starter on the new seca yet, but chacal sells em for around 20 space bux a set:

HCP4158 Aftermarket starter motor BRUSH SET, fits all XJ650, XJ700, XJ750, and XJ900RK models. Order one set to do one starter.
$ 18.00

By time you factor in shipping to the US, you'd probably be better off just putting in a new set; not that tough of a job (probably a 4/10, due to the soldering). sorry dude!

 

Just bumping post. It's cost prohibitive to ship bigger stuff to the States (exhaust, seat, etc...). Still have a bunch of parts available:

Seat - original cover, good shape.
Rear tire/rim - Bridgestone spitfire, ~10,000km, lots of tread left.
valve cover from 81 750 (same as 650)
Left handlebar controls (-clutch lever which is all bent and should not be used)
Right handlebar controls, new starter button (missing throttle plastics)
matching tank/helmet/ignition/chain with a couple keys
Shifter lever
Airbox (not sure of removal process)
Airbox beauty chrome
Airbox --> carb joints. pretty new set.
Airbox --> carb joints. originals.
MAC 4-into-1 exhaust (some dents and hole 2 pipe is bent slightly). Should be workable still. Missing a couple nuts.
Front frame reflectors
Left and right hand control clusters (clutch lever is bent -- no throttle plastics)
114 fuel jets (4)
116 fuel jets (4)
intake manifolds, some cracks but ok shape.

 

PM'd

 

And replied ... Should be shipping after work today! Thanks!

 

can you send me pics of the airbox stuff?? jyates2@gmail.com

 

Seat - original cover, good shape.
Rear tire/rim - Bridgestone spitfire, ~10,000km, lots of tread left.
valve cover from 81 750 (same as 650)
Left handlebar controls (-clutch lever which is all bent and should not be used)
Right handlebar controls, new starter button (missing throttle plastics)
Right yics cover
matching tank/helmet/ignition/chain with a couple keys
Shifter lever
Airbox (got it out!)
Airbox beauty chrome
Airbox --> carb fjoints. pretty new set.
Airbox --> carb joints. originals.
MAC 4-into-1 exhaust (some dents and hole 2 pipe is bent slightly). Should be workable still. Missing a couple nuts.
Front frame reflectors
Left and right hand control clusters (clutch lever is bent -- no throttle plastics)
114 fuel jets (4)
116 fuel jets (4)
intake manifolds, some cracks but ok shape.

Just bumping, got the airbox out... finally... looks like it's possible to reinstall into the 650 without the engine removal...

 

Just updating the list, sold a few more things.

Here's whats left:

Seat - original cover, good shape.
Rear tire/rim - Bridgestone spitfire, ~10,000km, lots of tread left.
valve cover from 81 750 (same as 650)
master cylinder perch, lever thing.
used)
Right yics cover
matching tank/helmet/ignition/chain with a couple keys
Shifter lever
Airbox (got it out!)
Airbox beauty chrome
Airbox --> carb fjoints. pretty new set.
Airbox --> carb joints. originals.
MAC 4-into-1 exhaust (some dents and hole 2 pipe is bent slightly). Should be workable still. Missing a couple nuts.
Front frame reflectors
Left and right hand control clusters (clutch lever is bent -- no throttle plastics)
114 fuel jets (4)
116 fuel jets (4)
intake manifolds, some cracks but ok shape.
Right side tank badge, nearly new.

 

would you be willing to get rid of circular gauges and headlights?

 

Ahh, sorry elGato... what i just posted is all i have left (mostly). The gauges are long gone (Metric set too, btw)...

 

Just updating the list, sold a few more things.

Here's whats left:

Seat - original cover, good shape (holding for someone)
Rear tire/rim - Bridgestone spitfire, ~10,000km, lots of tread left.
valve cover from 81 750 (same as 650)
master cylinder perch, lever thing.
Right yics cover
matching tank/helmet/ignition/chain with a couple keys
Shifter lever
Airbox (got it out!)
Airbox beauty chrome
Airbox --> carb joints. originals.
Right side tank badge (new as of 2 years ago)
Front frame reflectors
114 fuel jets (4)
116 fuel jets (4)
intake manifolds, some cracks but ok shape.
Right side tank badge, nearly new.

 

mwhite... PM sent

 

pm sent on the tank badge

 

Hey all,

Most of this beast is now gone. I still have a few parts, the tank badge is still available, but the rest is pretty much gone. Sold the rolling frame for 50 bucks (with engine), which is what i paid for the wreck initially...

If i never replied to you guys i blame the internet... mtnbikecrazy55 i still have the tank badge, somewhere!!!