1. Some members were not receiving emails sent from XJbikes.com. For example: "Forgot your password?" function to reset your password would not send email to some members. I believe this has been resolved now. Please use "Contact Us" form (see page footer link) if you still have email issues. SnoSheriff

    Hello Guest. You have limited privileges and you can't "SEARCH" the forums. Please "Log In" or "Sign Up" for additional functionality. Click HERE to proceed.

UPSIDE DOWN FORKS FOR AN XJ550 SECA (1981)

Discussion in 'XJ Technical Chat' started by oz_johnno, Jun 5, 2014.

  1. oz_johnno

    oz_johnno New Member

    Messages:
    19
    Likes Received:
    0
    Trophy Points:
    1
    I was just wondering if there was a set of upside down forks that will bolt up to my 81 model xj550.

    Ideally it would be s straight swap, but if there is an adapter available for the conversion, that will be ok too

    thanks in advance

    Johnno
     
  2. oz_johnno

    oz_johnno New Member

    Messages:
    19
    Likes Received:
    0
    Trophy Points:
    1
    nuffin but crickets... *chirp chirp*
     
  3. lacucaracha

    lacucaracha Member

    Messages:
    359
    Likes Received:
    1
    Trophy Points:
    18
    Location:
    Napa, CA
    It would take pretty major surgery...

    USD forks have a much greater OD at the top, so you'd have to machine out the triples to fit. The problem that arises: not enough meat on the triples to machine out.

    Easiest way to do it would be to sourest some forks, like from an R6, and figure out a way to mount them. You need everything-wheel, brakes, fabricated mounts for the gauges, etc.

    Check out this guys thread, and you'll get an idea:
    http://xjbikes.com/Forums/viewtopic/t=40332.html
     

Share This Page