1. Some members were not receiving emails sent from XJbikes.com. For example: "Forgot your password?" function to reset your password would not send email to some members. I believe this has been resolved now. Please use "Contact Us" form (see page footer link) if you still have email issues. SnoSheriff

    Hello Guest. You have limited privileges and you can't "SEARCH" the forums. Please "Log In" or "Sign Up" for additional functionality. Click HERE to proceed.

pic needed

Discussion in 'XJ Technical Chat' started by Ltdave, Aug 22, 2007.

  1. Ltdave

    Ltdave Member

    Messages:
    996
    Likes Received:
    1
    Trophy Points:
    16
    Location:
    as far east as you can get in michigan 43.027407,
    has anyone got a pic of a 550 maxim from the rear quarter?

    specifically the grab bar/turn signal/shock mount?

    im having a real brain fade on which bolt goes where!

    thanks for bailing me out (ahead of time!)

    david
     
    Ltdave, Aug 22, 2007
    #1
  2. stereomind

    stereomind Active Member

    Messages:
    1,440
    Likes Received:
    6
    Trophy Points:
    38
    Location:
    Tulsa, OK
    like this?

    any other angles?
     

    Attached Files:

    stereomind, Aug 22, 2007
    #2
  3. Ltdave

    Ltdave Member

    Messages:
    996
    Likes Received:
    1
    Trophy Points:
    16
    Location:
    as far east as you can get in michigan 43.027407,
    yeah thats it!

    my chrome grab bar is held on by some long bolts with a sleeve on them. ive got a guy at work looking for the correct 10mm bolts (M10x1.0 vs. M10x1.5 or fine vs standard thread pitch)...

    i got some M10x1.5 and they didnt screw in...

    thanks

    david
     
    Ltdave, Aug 30, 2007
    #3
  4. SteveBroskey

    SteveBroskey New Member

    Messages:
    9
    Likes Received:
    0
    Trophy Points:
    1
    Location:
    Rochester, NY
    I think they're M10x1.25
    didn't tighten mine properly after installing a sissy bar from an xs special, and lost one bolt and one nut. The nut at the front of the bar is the same threading as the bolt at the back, that will help you look. I got a replacement at at Advance Auto Parts
     
    SteveBroskey, Sep 6, 2007
    #4
  5. Ltdave

    Ltdave Member

    Messages:
    996
    Likes Received:
    1
    Trophy Points:
    16
    Location:
    as far east as you can get in michigan 43.027407,

    yeah M10x1.25 might be it because the 1.0s are WAY TOO FINE...

    im looking to put some 15 or 20 mm long bolts in it to get rid of the sleeved posts. i dont have a pic available to put up but you all would agree with me...

    d
     
    Ltdave, Sep 6, 2007
    #5

Share This Page