1. Some members were not receiving emails sent from XJbikes.com. For example: "Forgot your password?" function to reset your password would not send email to some members. I believe this has been resolved now. Please use "Contact Us" form (see page footer link) if you still have email issues. SnoSheriff

    Hello Guest. You have limited privileges and you can't "SEARCH" the forums. Please "Log In" or "Sign Up" for additional functionality. Click HERE to proceed.

XJ650 Seca Intake Boot Plugs

Discussion in 'XJ 3D Printing & STL Files' started by Kyle Walton, Jun 17, 2025.

Tags:
  1. Kyle Walton

    Kyle Walton New Member

    Messages:
    7
    Likes Received:
    4
    Trophy Points:
    3
    Location:
    Mansfield, CT
    If you're like me and were almost done with your carb clean/rebuild for... a while, you might also be like me and want a plug to keep critters from crawling into your engine via the intake boots. I swapped out the shop rags stuffed in the intake boots with these 3D printed caps.

    IMG_2448.jpg

    I printed them with a .4mm nozzle, .2mm layer height (default settings across the board) and they had a nice snap fit into the intake boots. There are also some little tabs to help remove them if you ever feel the need to reinstall your carbs and ride your motorcycle.

    Link to Printables:
    https://www.printables.com/model/1331071-1982-yamaha-xj650-seca-intake-boot-cover
     
    Kyle Walton, Jun 17, 2025
    #1
    Huntchuks and Dave in Ireland like this.

Share This Page