1. Some members were not receiving emails sent from XJbikes.com. For example: "Forgot your password?" function to reset your password would not send email to some members. I believe this has been resolved now. Please use "Contact Us" form (see page footer link) if you still have email issues. SnoSheriff

    Hello Guest. You have limited privileges and you can't "SEARCH" the forums. Please "Log In" or "Sign Up" for additional functionality. Click HERE to proceed.

XJ750 36mm Showa Fork Cap Removal Tool

Discussion in 'XJ 3D Printing & STL Files' started by co.dirtbiker, Sep 24, 2026 at 7:26 PM.

Tags:
  1. co.dirtbiker

    co.dirtbiker Active Member

    Messages:
    323
    Likes Received:
    228
    Trophy Points:
    43
    Location:
    Colorado, USA
    Yet another XJ tool. This one is for removing the fork caps on my '83 XJ750 Seca, but I think there are several other models that use the same 36mm Showa setup. (I bet @chacal knows which ones)

    These are the type where you have to push the cap in and hold it, while simultaneously digging a little wire clip out of a groove. Not easy to do with just two hands.

    Here's the write-up for the tool on Thingiverse:
    https://www.thingiverse.com/thing:7412701

    It could pretty easily be adapted to other sizes too if there are some that have a diameter other than 36mm out there. If you have specs, send them to me and I can post alternate files.

    upload_2026-9-24_18-19-1.png

    upload_2026-9-24_18-19-30.png

    upload_2026-9-24_18-25-55.png

    upload_2026-9-24_18-19-49.png
     
    co.dirtbiker, Sep 24, 2026 at 7:26 PM
    #1
    Huntchuks and Simmy like this.
  2. chacal

    chacal Moderator Moderator Supporting Vendor Premium Member

    Messages:
    9,389
    Likes Received:
    2,090
    Trophy Points:
    113
    Location:
    The room where it happened
    Very nice!
     
    chacal, Sep 24, 2026 at 11:07 PM
    #2

Share This Page