1. Some members were not receiving emails sent from XJbikes.com. For example: "Forgot your password?" function to reset your password would not send email to some members. I believe this has been resolved now. Please use "Contact Us" form (see page footer link) if you still have email issues. SnoSheriff

    Hello Guest. You have limited privileges and you can't "SEARCH" the forums. Please "Log In" or "Sign Up" for additional functionality. Click HERE to proceed.

Jetting getting closer!

Discussion in 'XJ Technical Chat' started by martinfan30, Jun 19, 2008.

  1. martinfan30

    martinfan30 Member

    Messages:
    114
    Likes Received:
    0
    Trophy Points:
    16
    Location:
    Carson City, Nevada
    ok, fellas...

    Now my 3500-4000 sputtering (lean) is ALMOST gone. My current setup is 122 mains, .065" shims under the needle. 41 pilots 3-31/2 turns out.

    It seems to be loading up a little down low now after I jacked the needles up again.

    My thinking: Get 124 mains, use one shim and retest.

    Thoughts?
     
  2. Jim_Vess

    Jim_Vess Member

    Messages:
    244
    Likes Received:
    1
    Trophy Points:
    16
    Location:
    Lafayette, CO
    I'd go to one shim and leave the mains alone. It's easier to diagnose by making one change at a time.

    If it's lean at WOT, then up the mains.
     

Share This Page