It doesn't respond to the idle knob at all...
So I leaned out the adjustment screws and then put them at 2 turns which made syncing easier but it’s still doing something weird... I got #1 to...
Wow! That’s pretty interesting! Then would it be a good idea to “lean out” all of them, turn them out maybe 2 turns and then adjust from there to...
Turning the mixture screws IN leans the fuel mixture. -Now I know! The idle SPEED knob needs to be backed out almost fully. Choke is off,...
Having issues with syncing carbs now... Hogfiddles rebuilt my carbs so I know they’re good but when I have my Carbtune Pro setup as instructed and...
I jumped the solenoid as recommended after it had the issues by placing a screwdriver onto both bolts of the solenoid. my battery looks strong...
I’ve taken care of the battery by using a smart tender that shuts off when done, when testing it looks good too. I tried jumping the solenoid and...
Ugh! I tore the starter part and everything met spec per Chacals posting on XJ4Ever but it still won’t work :( even check for bolt wiring to make...
So I was right when I turned the key on and connected the battery positive terminal to the starter it should have kicked over? I’m gonna pull the...
@Polock Oh! That’s so much easier than how people explain it on YouTube! I did it with a screwdriver and there was just a click... So that tells...
Hope I did it right, hard to see how people were doing it on YouTube, it didn’t click it do anything so that means it’s busted? [ATTACH]
Checked the fuses and they’re good, none of them popped, and it ran for about 3 minutes straight, turned it off since it starting gradually...
Bike is acting weird. I started it up and let it for a few minutes and then shut it off with the key. Came back 30 minutes later to turn it on so...
I’m in Chandler!
I really liked the Progressive 430’s but they have a cruiser look to them (great for Bobber style) so I’m going with the 412’s 13.5” and here’s...
@50gary So when looking through your project, you basically did what I intend to do but you have to upswept hoop yet created the rear fender which...
I may have a safety diode block for you, still need one?
I was thinking the same thing
No load (center stand) 14” - with highest preload setting Max compression 11” - lowest preload setting bottoms out at top of frame rail at 11.5”....
How about a 1 inch increase in shock length?
I do feel like I will have to curve the future mud guard underneath to have the space but I’m curious what others have used that have done...
With bike on center stand, end to end of mounts is 14”, when I sat at it with max preload, it was 13”, when I hop up and down on it it moves...
Yea they look original! [ATTACH] I’m curious that since the plastic dome under the subframe goes up about 2.5 above the lowest part of the rear...
SUSPENSION!!!! Ok so I was planning on doing a hoop and seat setup just about exactly like this: [ATTACH] But upon setting up my phone to record...
I purchased a marine grade fuse block, the upgrade was easy and even easier once I unwrapped the wiring and untangled them, suddenly had more wire...
I think it would have made a huge difference if I was still using incandescent but not on the LED headlights, I had to keep touching the wire to...
Yes it is OEM, their posting is confusing and doesn’t come with that part. It was actually my first test of stripping paint, learned a lot on that...
13.62 at the battery, tender attached, engine off. 12.60 at the headlight, no load 11.30 at the headlight with load with 14* wire from battery to...
Lithium?
Wow, after trimming back wiring and having all my connectors tucked under the tank, there’s very little room left for me under there! hopefully...
I like it a lot! Where did you hide all the electronic stuff and battery?
I’m currently getting 12.2 volts at the headlight connector, does that sound about right? Is it still worth redirecting the headlight wiring? I’ve...
Do yourself a favor, get an Acewell gauge! They also have an adapter to convert the speedometer cable to a digital display
Whoa! That’s a sweet modification on the rear suspension! How does it handle?
Luckily with the larger bucket and flipping them they turned out looking pretty good on my set up! I thought the same thing at first so I moved it...
I got it off Amazon, at first it looked funky sticking off the bars but after converting to the Acewell gauge, I had an open mount so I just moved...
Update! so I did trim back about 1’ - 1 1/2’ feet of wire (a lot more than in the photo), unwrapped most of it, untangled them since the were...
I thought I had it pretty snug but I guess this new washer had more “crush” to it than I’m used to! Use a Torque wrench and it appears to have...
Oil drain plug is leaking.... I installed a brand new aluminum crush washer that was a good fit, am I suppose to use something else? The one I...
That was on my mind as I saw that somewhere in the forums, I'm having issues releasing the terminal spades from the terminal boxes using a tool I...
After doing a test run I’m gonna have to install the upgraded fuse block I have waiting, to avoid future issues here. [ATTACH] Everything seems to...
Thanks! The wiring step had me scared to jump in for awhile but after going through it at least 100 times, I'm getting slightly more comfortable...
Now I can’t figure out the Peach and Brown wires for the tachometer... The only other Peachis attached to the horns, simply to connect them so...
awesome, then it’s going on the trash unless someone wants it!
Brand new! Unused! Made by Galfer I bought it too early in my project as the replacement handlebars are MUCH shorter, it’s too long for me to...
Wow, did not think that would exist on a bike of this age, some newer bikes don’t do that! ive always presses the button even on my newer bike...
Then wouldn’t I want to keep it? perhaps I don’t know how it’s meant to function... does it self cancel after a certain time or speed? without...
What does it cancel? The turn signal??? I don’t think it has a reed switch as this is the new setup. [ATTACH] [ATTACH] Sadly this brand new...
Do you think it would be ok to delete this White/Green wire? I have a digital gauge from Acewell and this one is just hanging around, with engine...