What is your asking price?
Hi, I know this is an old thread but I have a question about the numbers printed on the rods. Does the number have a letter in front of like G5?...
I guess my concern is will I be able to get the oil galleys cleaned of the glass. If I did buy another crankcase where the bearing inserts were...
I coated the mating surfaces with silicone I removed all bearings from the cases and coated where the inserts go with silicone. I used some...
I know this is an old thread but I am looking for a high heat internal engine paint. I glass beaded my engine and it was suggested to me to coat...
[ATTACH] Here is the picture of the washers for the speedo drive. So the washer in my picture seems to be an extra.
I went to the link you provided and read it. I guess my problem is why was there the extra washer(the one at the bottom of the picture) in it ....
[ATTACH] I am replacing the bearings in my xj550 when I took it apart it has the long spacer with the thin spacer and an additional spacer shown...
I'm on either my 4th or 5th order from XJ4EVER I am very pleased with Lens service he is very prompt checking out what you want and replying with...
XK550H I ordered one today from XJ4Ever Thanks for your reply
I am in need of the throttle shaft for the #1 carb(left most carb) on my 83 XJ550 maxim. I am wondering if someone has one they will part with?
I am located in Canton Maine.
I am looking for one float bowl that is used on the two right hand carbs.
bumped up
I am wondering if someone would know where I can find three of these studs? I have already checked with xj4 ever they have discontinued them I...
if you hook your battery to the starter positive to the post on the starter and the negative to the case of the starter it will tell you if there...
Have you tried connecting your battery directly to the starter?
The engine acts as part of the frame.
They were made in 82 and 83 they have a twin cylinder dohc engine.
[ATTACH] This is my xs400 secs it is a 82 I bought it in 2009 for fifty bucks. It was in really rough shape I have pics of it when I bought that I...
I kept the stock petcock because I wanted to have the reserve.
I was born in Presque Isle grew up in Freeport and I now live in Canton Maine.
oops sorry for the double post I didn't think that the first post was showing up.
[ATTACH] What I did is I made a square plate out of aluminum and a gasket to fit and then I took the back of the peacockoff and then the plastic...
[ATTACH] Wha I did is took the back of the peacock off took the plastic spacer out and made a square piece out of aluminum and then I made a...
I own a 400 Seca and that is what I did to mine it works like a charm.
I am new too . Welcome!!! I have owned Three Maxims a 650, 700x and a 550 which I just bought and am working on to get it going. So far my...
Thanks for the info I will try that.
It could be sawdust I am not sure there was a lot of dirt etc on outside of engine.
[ATTACH]Got pistons to break loose and pulled head off rings are all stuck except for #2 piston.
[ATTACH] I pulled the head off and put some diesel fuel additive in each cylinder and let set for a couple of days.
I am new to the forum I have owned 3 XJ bikes a 650 Maxim, 700x Maxim and I just bought a 1982 550 Maxim.The 650 I bought new the first year they...