Couple pics
Hello everyone, I have came upon a 1982 XJ750 max and it only has 8000 original miles. Seems to be in great shape. chrome is great, electronics...
Why cant i see the pictures on the write up? Thanks!
Thanks for the replys! I'll order the kit tonight! It was a Cold 47 here in Iowa bump starting the ol lady last night!
Load test on battery at the shop turned out good. when starter is pushed it drops to about 11.5 Battery age is unknown but appears to be fairly...
So I checked as much as I know with my volt meter everything had power and ground was good. Just for backyard sake I hit the started a couple...
I checked ground from the strap to the battery is good. And I took battery in they said it tested good. Which other connections should I test?
So I took my bike out last night to work, it was a little chilly here around 47 degrees. It had a little trouble starting out of the drive way, I...
There isnt really anything there just a cap and 2 pieces of 2 inch long by 1 inch approximately, pieces of pipe. I guess my question should be...
So i pulled the "baffle" which ended up being a lack there of. Basically its just a cap and two cones that were cut off and one seemed like it was...
1982 xj750 max. Someone before me put a 4 in 1 aftermarket exhaust on, and took the baffle out. I would like to put a baffle back in so its stock...
After adjusting the valves will the carbs need adjusted as well?
Thanks stumplifter! Sounds good ill get it cleaned up and put some powder on and hope for the best. Really save some dimes if I didn't have to...
Another probably stupid question, Can i clean around the headgasket with brake clean, or should I use some type of degreaser? I know that RTV can...
I haven't yet, I just bought the bike from my friend but dont have a trailer available till monday, I was working on adjusting the clutch a little...
Thank you!
So digging in on my 1982 xj750 Maxim, When I have the clutch lever pulled in and shift down into 1st it lightly jumps forward. it isn't the normal...
Very nice guys, that clears it up, sorry I misunderstood. Thank you!
Is there a thread for what to do when you first get a motorcycle. I'm guessing valve adjustment is a first thing.
So when using the shim pool I will need to leave the wire in until I get the shims in the mail?
So when using the shim pool I need to leave the wire in until I get the shims in the mail?
Hey everyone i took the leap, or plunge and bought the 1982 xj750 officially today. Now the work begins. Thank you everyone for your input and...
Awesome Video! thank you
Does the pool send the tool or what is the best place to purchase the valve adjustment tool? Thanks
Does anyone have a link to a good set of feeler gauges that will work for valve adjustment needs?
Very cool! Thank you
Newton iowa
What is a shim pool
I'm sure this is a dumb question. I'm assuming that the shim is the adjustment to the valve clearance. Where do we get shims? Thanks
I'm guessing the "square part" I'm referring to is the chain guide?? Thanks
Bike runs and starts new tires with no weather check. Stickers on tires before I took it down highway. New clutch cable but needs adjusted a...
Sorry I didn't get any notifications for replies so thank you all very much! I'm not sure if you are going to be able to see this but on the...
Hello all. Newb here. My friend has a 1982 XJ750 and seems to be in fairly good condition. Runs well but once it warmed up some oil started...
