[ATTACH] Sold it. I’ll miss you Betsy
Color tune helps !
What kind of jetting you do for pilot and main?
Affirmative
Affirmative my learning computer is much stronger
What size screens go under float needle for xj750 maxim
Throttle hesitation thoughts? I have to ease acceleration. There’s no backfiring. Will bog for a sec and then boom !
Installed new stator and brushes. Alternator is putting out 12.6 volts while reving. Not sure where to go from here. Rectifier passed diode test.
There was a lot of resistance went testing stator. Regulator passed diode test. Replaced stator and brushes today. Hoping to fire up soon to test...
Installed new stator and brushes
You are right I removed cover and saw brushes are below 11mm one was shorter then other also. Will replace and keep ya updated
I’ve already replaced caps and checked tolerance with plastic gauge. Took them awhile to find at autozone lol. I’ve done lots of cleaning on these...
Having cold start issues. There’s spark on all plugs. Once bike is warmed up no starting issues. Thoughts ?
Sorry forgot to ask what tolerances should i be looking for with a plastigauge? I will remove them tomorrow and post some pictures for more...
How can I tell if the cap is bearing or non bearing? There are two caps that this has happened to. Both are the smaller ones located on the right...
Went for a spin to the hardware store today. Last stop sign I noticed some smoke coming from front end. I didn’t think much of it til I made it...
Yeah made sure throttle was open. Saw a lot about cheap gauge tools. Might buy a name brand one or rent and test again. I appreciate the quick...
She runs strong. I’ve been working on dialing in carbs this season. Synced carbs and colortuned. My plans were to just ride and consider new...
I have a 82xj750 j maxim did compression test numbers yesterday 115 ish on all cylinders. Saw on the forums 128 was considered low. My question is...
Anybody have tips on cleaning calipers the were rings go.
I did a valve shim job a couple weeks ago. Happy with results. All shims were out of spec on mine. Today I took apart front calipers for cleaning...
Swing arm is still pivot. The back end of the frame was chopped off karate style. Dom tubing was then welded on to the back end. Notched new...
Yeah that’s true. I’m just saying that a lot of people that hard tail these bikes should beef them up more.
I would change your hard tail setup on shaft side. I broke the stud on mine. There is now a bracket welded to the axle.
Was 60 to in Cincinnati went for ride. Clutch cable snapped lol. Friends are great! Picked up a new one and hit the road. Pulled plugs after...
[ATTACH] Been browsing the thread and decided to make an account. Working on a 82 XJ750 Maxim. Had problems with boss springs 2 years ago....