I tried it again this afternoon and got a little putput! I put a battery charger on it and it started right up. I guess I'll be buying a new...
For some reason I can't get the bike started! I took it for the first ride of the season Tuesday and everything seemed fine except for the high...
While replacing the valve cover I noticed that the stuff I used to loosen the bolts got on the rubber boots to the engine. Well they looked like...
Another order delivered! Was sent out Monday got it on Thursday! Now the fun install begins!!!! Thanks Chacal!
I'll check on the size in the mornin. Next time I'm @ those big box stores I will have to check!
Well....it's a drill bit that only works when put the drill in reverse. The NAPA Guru said that it would bit into the bolt and it would twist out...
While trying to put the clutch plates back together i broke the off using a torque wrench! Alot of course words flowed through my head @ this...
Wow! Thank You!
Maybe they put sails on the bike!
Just opened the box of spark plug that I bought at NAPA and just realized that the terminals are different. I did tell them that is was for an 82...
Sweet! Thanks for the tips!
Hello all! I was looking for any tips before I replace the springs and friction plates in the clutch. I plan on running the bike to get it...
Beautiful Bike! Where did you get the tail section from? what kind of bar end mirrors are those and how do they work?
WELCOME! This site has TONS of info and help!
My order came in 3 days! Chacal thank you! I'll be ordering more once I get theses installed! Thanks Again!
Chacal! Thanks for the parts! It came Saturday morning! Can't wait to get my new clutch installed! Will be ordering more once I get these...
Love the look! what bar end mirrors did you use? How well do they work?
Re: Custom Blue Painted Tank + Maxim Rear Springs Nice! Are you going to put the tank emblems back on?
If I read the Spaniard build right, he used a Virago's wheels for the front and back? Would that be a direct swap? would it work on a SECA 750?
I think I will be rebuilding the pepcock! Thanks RickCoMatic that's a good idea! Thanks to everyone for the help!
The bike hasn't been run for a couple weeks and the #1 and #2 carbs are leaking. They were cleaned and synced over the winter. When I did ride...
I don't remember it doing it last year. It also was the 1st oil change and long ride of the year. I was planning on changing the oil after a few...
I checked the bottle and it is 10w40 Store brand oil. Bottle says nothing about friction anything just sludge protection. So how do I load the...
ok, I will check the bottle, but how do I load engine?
When you guys are having the slipping problem is it in all the gears or only certain ones? I just changed the oil in mine and it has been...
WoW!
Very Nice!
It is. What am I looking at? The water that can out was clear.
Went for my first real ride on the bike today. When I got to my destination I noticed a leak. It looked like oil, but then I noticed a little...
Thanks for all the help! I could have sworn I read somewhere to put the beer and brake fluid in there! I guess you cant believe everthing you...
I will give it a try. Out of beer anyway!
I just rebuilt both calipers and reassembled them. A mechanic suggested using some grey antiseize, so I used some when I reassemled. Then used a...
Thanks for the help!
I just rebuilt the calipers on the SECA 750. When I put the pads back I noticed that 1 pad had a shinny metal part on the back and the other...
I had a similar problem with my first SECA 750. I changes the old fuse box to blade fuses and that fixed the problem.
So my wife was wrong! It not my fault! Ha! Ok I'm sure it is! Thanks!
married 10 yrs in aug but together 15 yrs total.
I rush home from work today to pull the bike out of the shed. The front brakes are frozen again! This happened last year too! My wife always...
Sent you another PM. Seem to be havin an issue sending you a pm. Did you get my last attempt?
just sent you a pm
Who makes it? Do you need to remove it when you change the filter? anything you don't like about it? How much and are the lines included?
Do you still have the oil cooler adapter? If so is it original or aftermarket?
Looks good to me! Maybe I'll start looking north of the boarder for my next bike!
I did 2 of them. The first was a blade fuse box and the other was inline ones. Not that hard but go slow and mark all the line so there won't be...
Just got my 82 SECA750 up and running after a few years of sitting. I had the carbs done and put them back in, POR 15 the tank, and using premium...
Thanks for the info!! This place never stops amazing me!!!!
Looks like its a block off for the vey bottom of the anti dive? How did you make those blocks?
can you take off the hole unit and just put a block off plate on the fork?
My friend and I are working on an 82 SECA 750. I was wondering how you would go about blocking off the anti dive? THANK YOU for any help! seca750