I need (4) Hitachi y-10 carburetor vacuum diaphragm needles in good shape. Anybody have any that they are willing to sell? Thanks, Jack
I need 4 y-10 vacuum needles to fit the Hitachi carbs on my 1982 xj650 seca. Thanks in advance.
I am overhauling a 1982 xj650 Seca brake master cylinder. Having difficulty removing the retaining ring which holds the piston in. I have...
Recently received a parts order from XJ4Ever, (Len). He is a great communicator and his customer service is top notch. A pleasure to do...
I am chaning my front brake lines to braided stainless steel lines. How much brake fluid do I need to fill the system? Thanks in advance, Jack
I am still looking for the above parts for my 1982 xj650 seca. Anybody???
I am still looking for a grab handle for my 1982 xj650 seca. Help!!!!
Have you tried oiling it? Usually solves the problem. Somewhere on here there is a complete writeup on this issue. Hope this helps, Jack
Wanted, Grab handle, (lifting handle) for the left hand side of a 1982 XJ650 Seca. Thanks in advance, Jack
I have removed the alternator rotor and find the alternator stator is rusted in and I can't figure out how to remove it without damaging it. Any...
How do I remove the alternator rotor and windings on an XJ750 Seca? Thanks in advance, Jack
The reason I was thinking about using the #55 mains was because that is the closest size I have to the stock size #50 jets. I have 3 sets of...
Has anyone tried running an xj650 seca (Hitachi carbs) with slightly larger main air jets in the carbs? The specs call for #50 main air jets and...
I need 4 y-10 vacuum needles, 4 -#40 fuel jets and 4 -#110 fuel jets to fit the Hitachi carbs on my 1981 xj650 seca. Anybody? Thanks in advance.
1981 XJ 750 seca brake discs are one inch larger in diameter than my 650 seca discs. I just went thru the process trying to replace my 650 discs...
I'm still looking for these Hitachi carb jets, Surely somebody has them around after doing a rejetting from stock job. Thanks in advance
I need a stock set of #40 and #110 fuel jets to fit a Hitachi HS32 Carb on my 1981 xj650 Seca. Also need a Y-11 vacuum piston needle. Anybody...
What is the hole size of a Hitachi #40 fuel jet? Anyone?
Does anyone have a chart (accurate measurements) of the hole sizes in the Hitachi carburetor fuel jets? Would be nilce to know. Thanks in...
Within the past year, I purchased all new footpeg rubbers from a nearby Yamaha dealer. He had them in stock and the prices were reasonable....
I have a Hitachi carb with a broken float pin post. I have Devcon epoxy steel in my shop which should work ok to "glue" it back together and I am...
Is Shell Rotella T motor oil the same as the old designation Shell Rotella oil as far as using it in a motorcycle? Perhaps the "T" is just an add...
I am parting out a 1981 xj750 seca. I am wondering if the exhaust system from the 750 will fit a 650 seca (same year) with no modifications....
That file is a chainsaw file, not for filing the teeth but for filing the rakers between the teeth. They are available at any chain saw shop....
Can anyone help me find a new or used small sport fairing for my 1982 xj650 Seca. My 7 inch non stock headlight is smalller than the original 8...
How do I get the gas cap open on a yamaha seca when I have no key for the lock? I posted this into the wrong forum previously. Sorry.
How do I get the gas cap open on a yamaha seca fuel tank when I have no key for that particular lock? Thanks, Jack
I installed a Hella headlight conversion (purchase from Chacal) into my 1982 xj 650 seca which previously had the headlight changed from the...
Hey all you experts. Someone must have heard these noises before. Any comments would be appreciated. Thanks, Jack
Previous owner installed progressive front fork springs. A piece of steel tubing approximately 2 1/2 inches long is installed on top of each...
I am thinking about drilling my front brake rotors mainly for cosmetic appearance. Has anyone experienced increased or decreased braking...
Is this bike still available? Thanks, Jack (Campbell River)
Is the engine for sale? and if so, how much? Thanks, Jack
Black meter lead into meter centre terminal. Red meter lead into right hand terminal, Do not plug into 10 amp terminal on meter. That terminal...
Hi, I have a headlight bracket for an xj650 in very good condition. I think it will fit your bike. I am in Campbell River on Vancouver Island and...
I have a bank of Hitachi carbs from an xj650 which already have an aftermarket jet kit installed in them. Diaphragm needle is adjustable to 6...
I decided to overhaul my speedometer and replace the scratched face on it. It was reading accurate speed and the odometer was also accurate. I...
Last chance to buy these xj650 Hitachi carbs. Make me an offer please.
I still have this set of carbs for sale. If nobody wants them I will put them on ebay soon. Make me an offer. Thanks.
I have also wondered the same question. Seems like the carb float levels should be set while on the bike as the carbs are tilted at an angle when...
These Hitachi carbs have an aftermarket jet kit installed in them. Main jets are #122. Low speed jets are #43. Vacuum diaphragms are ok and the...
Does anyone have pictures, measurements and specifications for a four cylinder home made manometer/carb synchronizer? I want to build one but not...
My parts took only 10 days to be shipped from Chacal in Georgia to Vancouver Island on the west coast of Canada. Great service and a good...
Does anyone have a recommendation for the type of "magic liquid/juice" to use in an ultrasonic cleaner for cleaning carburetors?
I discovered an interesting thing after cleaning my carbs and getting them back on the 1981 xj650 seca. On carbs #2 and #3, the lifting fingers...
I will be 72 next month and have owned about 30 motorcycles over the years. Had a few accidents but still trying to keep the shiny side up....
Which part are you calling the "wafer"? Do you mean the rubber or neoprene piece with 4 holes in it?
Does anyone have a picture of the proper layout of the petcock on the 1982 XJ650 Seca? I can't get fuel through it in the "reserve" position....
Re: Two XJ650 Midnight maxims complete part out. HI again, Is there any chance that you can email me a picture of the carb set? I hate to...
Re: Two XJ650 Midnight maxims complete part out. First of all, are there four carbs all bolted together on a rack? I am not interested in...
