Hey guys small electrical project here and i'm not sure what the easiest way would be to wire in this simple voltmeter. The positive already has...
Yeah ive tried this as well, for me it seems like my helmet heats up even more while wearing the balaclava thus leading to more condensation....
Yeah thats the pinlock system I was talking about, sadly not compatible with my current helmet.
Hey guys been on here for a few months learning the ins and outs of these old cool bikes and have a question. My brand new helmet fogs up when...
update: New regulator I ordered was defective (should of bought from xj4ever ) for fun I hooked up the old voltage regulator and cleaned / fixed...
hmm ill keep an eye on it. seemed like there was enough clearance to not have issues, ive heard of people also using seat spacers to lift the seat...
Rainy day here so I spent it doing what was sorely needed... [ATTACH] [ATTACH]
Yeah I had put everything back together after messing around with the fuse wires and ignition switch wires and noticed the red (or brown i forget)...
Looks like the voltage regulator is probably the issue. the connector is partly melted on a few wires. Not sure on the multi meter, with a new 9v...
yup yup thanks for the link
yeah the monitor has the proper resistor on the lead. really doubt the multimeter is bad but ill test it anyway.
Thanks ill give that a shot.
This is sort of a continuation of my last thread where no power was getting to any fuse but main. after unplugging and replugging stuff in (also...
Right I have already cleaned ignition switch and contacts. it seems really new. Guess now I have to find where the hot 12v brown wire splices off....
Ignition switch looks really new. contacts and all internals were super clean. I believe this is a Maxim style ignition switch, would that cause a...
Took a good look at how the PO put in the inline fuse holders and to my surprise was done properly soldered and heatshrinked
Ok so brown wire and red wire connected to the key switch is getting solid power. There is no 12v at either r/w wire from kill switch when the key...
Thanks for the help guys got a kinda hectic work schedule so I'll try all these on monday and see what I can figure out.
This looks like a doublepost, more info can be found on the other one
So when I bought the bike the PO had just picked up a new in box battery from walmart its a bit shorter than the stock size with reversed...
Ok so no power to side stand relay (red/white) also no power to the ignition fuse on 20vdc reading shows 0.1 (red/yellow) also tested ignition...
ok cool so when I get home from work ill try removing the sidestand relay and see if its getting power. I'll also check the one in line fuse...
No power to headlight until she runs from what I remember when the bike was up and running, same with turn signals. only have brake running light...
Im in the black mountain / swannanoa area. Raleigh is a bit of a drive lol
Hey guys new-ish to the forums and in need of some divine intervention. I recently purchased a 1982 xj750 seca for $1100 running and driving (my...
