Hmm. Once I get it out I'll dig into it and let you know what I find. But I'm almost positive it's not water because it's always in my garage and...
I have a donor motor that is why I am pulling the motor. If that is the case how would all that fuel end up in the oil at the same time. And the...
I don’t see how it wouldn’t be hydro lock. Because the oil was more gas consistency than oil consistency. But I’m no mechanic either. What else...
I have drained all the oil. But there is a crack in the block. That is why I have to pull the motor
I found the problem. It hydro locked. There was a ton of gas in the oil. I have started getting ready to pull the motor. But have a question. Is...
I gotcha. I'll have to do some digging when I get some time. But I did find a 81 650 that had 16900 miles that I'm thinking about getting and...
Ok. So do you think it would be best to tear into the trans even though it seems to be fine now ?
I don't mean to keep making a bunch of new posts but right after I posted the last thing. I decided to try holding the shifter all the way up and...
I also found a engine pretty close to me without the trans. Is it better to go with one with the trans? It's also a yics and I don't think mine...
Well I figured out part of the problem. After more looking at the bike I found a hole in the block and cylinder. So I definitely need a new...
I know it's not an oil issue. I changed it 500 miles ago and make sure to check it before each ride. Including when it broke down on me. I will...
That sounds like that's probably it. I think if that is the problem, it would be best for replace that chain guide. What do you think? Is that a...
I am thinking it isn't just a starting problem or a valve or gas cap problem. Because the bike has ran fantastic up till this point. And all of...
I haven't checked the valves or gas cap. But the bike won't start now. The starter just clicks. It has done that every so often but seems to just...
Hi guys. I have a 81 maxim 650 and Today I went for a short ride. When I started my bike it started just like normal and ran great for the first...
That looks like what I'm looking for. I am new to motorcycles. But know my way around a wrench. Is this a hard thing to do or pretty simple? Any...
Hi guys. I am new here and have a 81 xj 650 and have the exact problem vargy61 had but I'm having a hard time finding the drive dog. Any help...