Hi, I have an XJ (with the hitachi 33mm carbs) and a it runs pretty good. It runs POD's (and yes I want to keep the pods) with pilot jets 43 and...
So today I finished the project completely. Of course running pods is not ideal but it drives pretty well for having those pod filters. The fun...
Yep still a spark, i checked that. I checked the mixture screws, they are the same for all carbs. Carbs were rebuild 100km before anyway....
So: Xj750 41y was running fine with exception of leaking inlet boots. My inlet boots were leaking at the joint between cylenders and boot. so i...
It is more or less finished. Only have to fix some minor issues. [MEDIA]
I ordered the most expensive o ring ever. Dont want an oil leak.
wow.. that's one expensive o-ring.. !
hi, does someone know the dimensions of the o-ring for the starter? (the one that sticks to the block). its a bit tricky to measure it without...
Fixed. There was not enough oil in the forks.
Hi, Xj750 41y 1984 My front fork is working fine under braking however under hard acceleration it rises a lot (max way out) this is not...
So I drove about 10km yesterday. It is super fast because it is so light but the idle is not good. It stalls after a while. I suspect a vacuum...
Haha good pair of eyes! 10min from the border (30 from Eindhoven) so yes we like a good leffe (or other Belgium beers).
It's superb. You can twist the banjo fittings in any direction so you can always mount it tentionless. Highly recommended.
It's alive! [MEDIA]
Adjusted the valves and finished the wiring harness.. And yes.. I did figgle in the brake light wires inside the main loom. [ATTACH]
I'm from the south. Finished the brakes yesterday. Installed the 19RCS brake pump and custom HEL brake lines. Should mention the build passed...
I like the building more than the riding however in the summer I drive often near the city (going for an ice cream etc.) . I rarely make long...
Update.. installed the 'exhausts' and finished the wiring. [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH]
Maybe ill put a computer fan on top of it
Please tell me where the air flow is coming from on the stock location.. :)
About the Jets: from experience i enlarged the mains with 10% and the slows with 8%.
---
Correct, I am busy with the wiring at the moment! The bikes feels 100kg lighter. There is not a lot of room to shave off more weight indeed....
So I finished the 'exterior' today. Now I'm busy with the wire loom etc. [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH]
It's a modified Benelli Mojave tank.
Sorry for not posting in 100% chronologic order. Rebuilt + tuned carburators: [ATTACH] [ATTACH] Made some plates to cover up the space...
Working on the speedo + painted exhaust [ATTACH] [ATTACH] [ATTACH] [ATTACH]
Thats great news, I will stick with the ''new" ones. They fit perfect.
It's not about the dept, it's about the metal plates that are inserted in the cover. tnx
Hi Xj750 41y My side covers are cracked. Ik found new ones but these dont have the inner structure that the old have. Van I use the new ones?...
Some more detailed pictures selection of my favourite tools [ATTACH] welded on subframe + seat pan [ATTACH] [ATTACH] ugly crown plate...
Talking about the tank, it was quite a challenge to make it fit. 1st step: remove the old brackets and weld in new ones [ATTACH] 2nd step:...
This is how I bought the bike [ATTACH]
Been busy on this bike for a couple of months now. Hardest part was to fit the tank but it worked out. Still a lot of work to do. Will upload...
Ok
Hi How do i adjust the height? Hitachi HSC33 Thanks
Ok thanks
I mean both the slow jet and main jet, thanks
Hi, Will Mikuni jets fit my Hitachi carbs ? And if, does someone have a cross reference table with sizes ? I have hitachi carbs which I want to...
Hi, I have a project with a carburator (Hitachi) damaged beyond repair. Which carburators are suited to fit my xj750y 41 1986? As the hitachis...