Well in sc a bill of sale gets you a temp 45day tag so no I'm not riding illegal although nobody's business if I were Ok oil sensor how do I get...
No I did not do a running sync because if I'm not mistaken that requires vacuum gauges and I do not have any sure I've used mowers and chainsaws...
Air cooled so it is in fact supposed to be cool I know it'll get warm but I am wondering if it's getting overheated and if it will tear up if I...
So I have the carburetors fixed on the bike air box I just fixed but now I've got a new problem so I'm making a new thread The bike rides good...
Bench sync
okay y'all so I have still not figured out the turning signal issues with this bike however I have another issue it will not stay in idle more...
Is there a way to bypass the relay I'm pretty sure that's the issue
Ok so bike runs pretty good current issues are: 1) bikes oil light keeps blinking as soon as it fires up during ride and until its shutoff 2)...
I'm not sure you read my comment through, did I check the master cylinder correctly and how do i check caliper with it disconnected? Few more...
So what causes oil light to blink steady while riding and what causes smoke to come out one exhaust after shutoff for about 45secs
Well correct me if I'm wrong but if the master cylinder has ANY pressure at all coming out it's working right? I took the hose off covered the...
So i can get a parts bike cheap I believe I can swap the entire front break system to mine I'm wondering why it wouldn't work? I think it will
How about the front brakes if I get the calipers master cylinder and all off of a different bike wouldn't it work on mine? Seen a video where a...
Also what can I do about the exhaust they're way too quiet
Instead of arguing yall might answer the question I posted? Thanks
Got the broke part out and it is sealed it's been re threaded halfassed and has a new bleeder screw tightened down in it but its not going to work...
Hey yall I'll try pulling the brake master cylinder later today and see if I can get the brakes working broke the bleeder screw on one side I...
So I've got the bike running but no front brakes and they wont bleed or build pressure on the lever never rebuilt these before any ideas on this...
How quick is he from the time I order to the time it gets delivered?
Yall think itd be delivered quicker if I order one here or Ebay? shipping to charleston sc
Yep the big one near the tci where regulator plugs in
Idk it's how I got it and the adapter is there but no regulator I'll probably order one
Gotcha. Headlight was on after 2 rides not very bright but was on for sure
Is v77 the model or is there another brand and model such as hitachi such and such#123
Well behind the tci box there's no regulator just a big adapter where I'm guessing the regulator would connect I installed new inline fuses so...
There ain't one.
I know there's no regulator cause the plugin is hanging behind the tci box Think the smoking exhaust stopped after I road it again next step is...
Well yall I've rode it around the block twice it runs good I need to tune the idle it revs way to much at a quarter turn of the throttle also when...
Ok and correct me if I'm wrong but the regulator would be left side near the tci box correct? If yes than will it stay running without one cause...
Bike runs changed plugs fired up good can the bike run around the block without the airbox?
Alright by the way if anybody needs an easier way to mount the carbs lol redneck ingenuity check out the pictures easiest I've ever got the carbs...
Ok so I'm rolling with the carbs as is but I noticed there's 3 threaded holes and since I've owned this bike no jets were in the bottom 3rd hole...
Same question never got answered seeing as the jets were clean and floats etc I was asking if anything else needed cleaning to make the bike run....
?
Ok thanks, are there any other things inside the carburetor that absolutely have to be cleaned in order to make the bike run?
Wow I did not even see the numbers for the jets until you pointed them out I think I see the enrichment tube it's the bottom right of my 2nd pic...
Can you picture a enricher tube? Wanna make sure I've not removed it
I just seen it, Idk where 80 and 225 are supposedly printed but I've got everything except the floats disconnected and soaking in gumout I'll be...
Did you see the pics? I've got the stripped jet out but do I remove the 2 in the other pic I already have but what do they go to are they supposed...
I'm not paying $1500 or anything more than maybe $100 for a dang good set of carbs I didn't pay but $200 for the whole bike I can get another...
I'm cleaning these ones cause I think they got gummed up somehow seeing as bike runs with gas soaked rags directly in the intake of the motor...
Do these brass pieces come out too they look like jets of some sort I'm gonna soak em all in gumout carb cleaner overnight Also one jet near the...
Think my idea will work?
Asking again. it's odd to me how one day carbs work next day they don't and I'm asking what would go bad all of a sudden? I'm thinking soak the...
I'm thinking soak the carbs in gunk after I remove everything let it all sit in gunk overnight (except rubber components) then boil it all in...
And yeah them carbs look pretty good how much for a set? Any discount if I ship you my set to rebuild and resell?
Naw your misreading. I'm asking a question in that comment not debating or making a statement it's odd to me how one day carbs work next day they...
If the carbs worked before I had relay and wire issues now that relays and wires are fixed what could all of a sudden go bad in carbs?
My question was what model carbs comes stock on these 82 maxim xj750 I think its hsc32 Hitachi right