Anyone know what he charges? Ive rebuilt them myself but I cant get them to run properly on the bike. I think they need snyced more than anything....
Does anyone know is there anyone on here that does carb rebuilds for SECA 2 Yamaha? Maybe a member that does them on the side or something? Thx
I guess I will have to make some changes. Thx
Are these the bushings on the inner tubes? The chrome portion of the shock?
I am having troubles with my 1997 yamaha SECA 2 XJ600 front fork suspension. When im riding it feels like a jackhammer at times. The suspension...
1997 Yamaha SECA 2 XJ 600 Carburetor synch questions. Can I leave the tank on or will this cause vacuum issues? I was getting carbs 1 -3- 4 to...
Is a special socket needed for the swingarm nut?
It seems like the PO did not put them back in. Dam the PO Thx
OK I have a few questions concerning a 1992 Yamaha SECA 2 that I bought. I bought it in pieces and have been putting it back together. I recently...
I have been looking for the later xj 600s front forks but cant find any can you post a set. ty
OK can Chacal make me a custom line? My bike calls for a 36 inch but I have some modifications and I need a few extra inches. I thinking a 40 inch...
I am interested in buying and replacing my front brake line. Do I order a brakeline that is -3AN and then order what banjo fittings? 10 MM banjo...
I might have the title that the PO has singed off on but it was not signed in front of a notary.
What does registering it in Vermont do? Can you please explain this process? Can you get a title after registering?
I dont have a title for the bike and it would cost to much to get 1.
Because the Magna has dual front disc brakes and also you can put air in them.
I have a 1985 non running Honda Magna that I was going to do a complete front end swap.
I wanted opinions on putting 39 mm front forks on my 97 seca 2. It has 38 mm forks but I have a set of 39 mm front forks I would like to install....
Yes exactly I think theres to much movement in them. WHat could happen if they rattle around like that. COuld it cause damage?
I put it back together already but it still has a slight clunk upon shutoff. I ordered another gasket and im going to take another look at it...
I recently fixed the clutch rattle on my 1997 Yamaha XJ 600 SECA 2. I noticed when I had it apart that the clutch friction disc had some play in...
I unplugged the wiring harness that came from the turn signal switch to test it. It was corroded inside and just needed clenaed and plugged back...
I fixed it today. I unplugged the wiring harness that came from the turn signal switch to test it. It was corroded inside and just needed clenaed...
Ok I found these plugs loose and not hooked to anything. The bike has no instruments.[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH]...
I removed the flasher relay and put a wire in it to bypass it and wire it straight and nothing happened. SO the indicator switch is drawing its...
OK so my 1997 seca 2 xj 600 has a 2 pin flasher relay. Are both those wires hot? Or is 1 a ground and 1 a hot wire. I also have found some type of...
My bike does not have hazard flashers. Or if I does I cant find them. I have been looking at a wiring diagram that I have from a manual that I...
My 1997 xj 600 turn signals have stopped working. How do I diagnose? I have a 1992 xj 600 parts bike. On my 97 the relay is on the brake side. I...
Finally got it apart. It has 2 pistons.
I hope to find out tomorrow.
Yes it has 2 bleeders. I have 3 calipers and they all have the same piston stuck, but I noticed they are each sticking out at different...
OK I guess ill be doing that tomorrow. I bought 2 of these bikes. The 1 that runs had a stuck rear caliper and I rounded off the allen bolts that...
I am trying to repair my rear brake caliper on my 1997 yamaha xj 600. DOes it have just 1 piston on 1 side or 2 pistons 1 on each side? I got 1...
OK I wont weld it. Can anyone tell me what size the socket is for the primary drive gear nut? I know the clutch boss is 30mm. Primary drive gear...
I need to do the clutch rattle fix. In stead of putting in a new dowel pin. Can I just weld it in place. So just put a spot of weld over the pin?
I just bought an 1997 Xj600. It has no instrument cluster can anyone tell me where the tach wires are at? Thx
