Mine looks nice and pretty, still a bright red redline, but even after a cleaning the needle doesn't move much. I hope someone out there has one...
Thanks!
THANKS! All I'm missing is the washer for the shoulder bolt. It seems the MMs have a different mount than the regular Maxims. I thought for sure...
Thanks, I do appreciate that. Sorry if I don't respond quickly, I got a lot of things going on in my life besides this. From searching eBay, it...
Silly question, but are you carbs getting gas from the tank? Your petcock might be bad.
So there should be two rubber bushings, right? One on each side of the footrest support bracket. Your pictures shows a hex cap screw. Is that the...
Did you ever get your seat?
"C3 & C4" can't be off time if your bike runs. Likely your carbs need work if your headers are cold.
I seem to have lost a small box of parts for my XJ750MK, including the hardware that attaches the muffler to the rear foot peg support bracket....
Your other post showed the price. $1800, right?
I have a 83 MM, and the previous owner replaced the fuse box with inline fuses. It looks like crap but it works, and also confirms there is an...
Putting the final touches on my '83 750MM. Anyone got any nice parts I might be interested in? Also looking for nice 1981 XS850MS parts,...
Damn, I have a spare 750 engine that runs. If this was closer I would bite on it.
I've been restoring a 750MK for several years now. I'm just about finished. I installed the exhaust, and discovered I misplaced the mounting...
It's pretty easy to pull the rear arm off, but the trick will be putting it back together and get the correct tension on the swing arm bolts while...
That's a long list on things done to it, and things it still needs... People don't line their gas tanks without reason. Carbs overhaulled and...
I have four exhaust pipes from my 650 midnight maxim for sale. They are in very good condition, as they only had 2900 miles on them before the...
I completely stripped the parts bike today, and after a small project on my 850 tomorrow, I'll be putting the other 750 MM back together. I will...
If someone bought this, I'm going to have parts available very soon. This weekend I'm completely stripping my 750 mm parts bike and will have...
I've got a set. I'm in the Chicago area. They're off a 83 750 midnight maxim. I sent you a pm.
OK, here is what I have available for sale... ask if you don't see what you want: Fenders ... both in decent shape with some very minor spots of...
Sorry I didn't get back right away, but I found another 750 MM with a title, so now I'm keeping this one. I will have lots of parts available in...
I posted some pictures in my gallery. I have the right hand side cover and the carb boots. I'll be happy to send more pictures of any part...
I tried to post a picture but it didn't go in. This is a 750 with the stock 4-2 exhaust. I'm going to try again with the picture. $700 will take...
Since the day I first owned my 83 turbo seca I dreamed about pumping it up some. I still wonder about a 650 maxim frame with a 900 seca motor...
I have a 1983 Midnight Maxim that I hoped to get running, but the PO never came through with a title. I can throw the parts on EBay, but after...
Did you have to reduce or enlarge from your pipes to the mufflers?
