I think there is an option on the ad to remove the buy it now after the first bid or leave it. I would guess the default is to remove it after...
Just posted it on your other thread. https://www.nicb.org/theft_and_fraud_awareness/vincheck
You can check the VIN on NICB's website. https://www.nicb.org/theft_and_fraud_awareness/vincheck
Yes, there is quite a variation in sound. The stock mufflers are very quiet. That's relative to other Harley exhaust options. The next option...
Yes, 2003 or earlier. In 2004 they changed the crossover design to connect to the slip-on, so that is why they would not work. They connect with...
Over a year ago, I got $750 for one that was running and rideable. 2nd gear popped out, and it needed paint. I paid $400 for it in non-running...
It is possible to get the airbox in without dropping the engine. You need to have very soft, pliable boots (mine were new). I jammed the boots...
Mmmmm... That stinks. DesignerMike can tell you for sure, but I am pretty sure you have to pull the motor and split the case to work on the...
The Yamaha version is one of those parts made of unobtainium. When they come up, they are few and far between. You might have more luck...
Yes, mine was. Agree that this one is an airhead. I was happy to pull down $750 for mine. I started at $1500 thinking the rarity of it would...
Agree with mcrw... Mine was rideable and cosmetically correct (polished aluminum where it should be, 5 valve carb covers, etc.) but had the 2nd...
Looks like the parts market is way off.
I had the same dilemma. It came down to the time it was going to take me to pay for the past 'sins' of the previous owners was more than I could...
A few inquiries, but everything is still here.
Decided to pull the trigger I see. Still riding with the Grapevine group?
Doing a little garage cleaning and ran across these Maxim X parts. Make an offer if interested. 1 - CA gas cap with key (non vented) 1 -...
And I was expecting to see a Spyder. I did the mountain biking deal for a while. Funny thing. I got more beat up and bloody on that thing that...
Carbtune is gone. Thanks guys!
Re: Colortune and Carbtune Pro Colortune is sold. Thanks hogfiddles!
Not the cheapest solution, but you might want to give these folks a call and give them the dimensions you are trying to fit. I haven't read of an...
Re: Colortune and Carbtune Pro Looks like the Colortune is a goner. Carbtune is still available.
Re: Colortune and Carbtune Pro A few inquiries, but no takers yet. They're still available.
Re: Colortune and Carbtune Pro Brodie has the right pic. A very slick tool to do carb sync's.
Gunson Colortune 12mm Part #4171 I used it a few times before I sold my X. $30 + shipping to your location. SOLD Carbtune Pro (includes...
You would really have to know what you are doing with that set-up. Looks like it would be easy to become a grease spot on the rock wall if you...
Pretty rare. They do appear in the states though. Not sure about Canada. The Canadian model was 750cc.
Thanks chvbob. Looks like you were right. Don't know if this is on stock, but found one. http://www.tooltopia.com/innovative-of- ... =nextag_r1
As far as I know, the answer would be no. You can step down from a 14mm to 12mm but can't go up from 12mm to 14mm.
Gunson Colortune 12mm Part #4171 I used it a few times before I sold my X. $50 + shipping to your location.
+1 with Time. If you've got a Walmart anywhere near, you can use Rotella T. It's around $10/gallon.
It's been quite the talk over on a harley forum. Everyone there thought it was pretty funny too. No one's safe from those guys. They are...
Wow. Miss a couple of days, and she is opened up for major surgery. Like Rick said, the XS link goes through the steps of using a dremel tool...
Not the exact same, but here is a link for the XS11's. http://www.xs11.com/forum/showthread.ph ... eadid=5090 There was another user that...
That matches my understanding between the two.
I used compressed air because I didn't want to deal with grease clean-up, but as man said, be careful as the pistons do come out with force. I...
My understanding is the same. They just changed the cc rating with the stroke.
Let us know what you think. I picked up a pneumatic stapler to install mine. Worked like a charm and didn't take that long. If you haven't...
Are the aftermarkets LED's by chance?
I second B&H Seatcovers which is Carvall's link. I got a X seatcover from them and it fit perfectly.
Check with Chacal. He may have what you seek. He has a parts list in the supporting vendor forum.
Is the headlight working? I believe they are on the same circuit.
Watch ebay. I had the same problem and picked up a complete thermostat housing that had the switch in it for a decent price. Or Mike's Maxim X...
Re: Sell the XJ and other bikes for a newer bike (GSX750F)or I was in a similar place. Spend time tinkering and fixing or riding. Since time...
Re: Joe Rocket Yamaha Jacket It's getting cooler. Any takers?
Glad they made it there. Thanks for picking them up!
I do have the ignition. I did have a helmet lock, but it went with the bike. PM me with your email address, and I will email you some pics on...
Updated with what's left.
I'm normally an XL guy, but got this in 2XL so that I would have a little room for layering. It fits fine and does have some room for a layer or...
Go with the plate set. I did the brushes first, and had to end up going with the plate set because one of the springs holding the brushes broke...
XJXLEE PM sent...