Doesn't the 550 have a shorter stroke than the 600's?
So I am working on a 1982 Seca 400 that needs a90/90/18 front and 110/90/18 rear. Are there any mini Seca owners out there that has found tires?
Piston Ringset 2nd over 4 sets needed. 49A-11610-20-00
No worries.
Who has had to replace valve guides in their JX?
My mechanic found someone from the old Cycle Newspaper that had made some. He put one in my Seca 650. I was able to pull one of my rivals down the...
Great, I only have head and tail lights.
Any updates on performance?
Should the Minimum wiring have a diode in it somewhere, if so where?
I have used JB Weld to cover pit's where the fork seals wipe with good luck.
[ATTACH] I found a oil cooler from a Hoysoung GT650.
Thanks, answer is no.
Do the Seca and the FJ, FZ, YX use the same exhaust valve?
Completed my Front end conversion along with the addition of a steering damper.[ATTACH]
Good news! Did you use a degree wheel, what were your numbers?
550 has a shorter stroke than the 600.
You can take .020 no problem but maybe play with the gaskets, head and base, and play with then to tighten up the squish area and gain more...
If you take the cylinders off you can leave the base gasket out for a little more compression. Use Yamabond instead.
I am getting ready to install two intake cams from the FJ motor in my FJ motor. I have some cam sprockets that are index-able, with the help from...
I looked in my notes and found the last jetting to be, Pilot jet's #15 If you don't go up on these you will be chasing your tail. Main jet's # 1...
My motor builder from back in the day, re- sleeved my cylinders and bored the cases to fit for oversize Honda pistons.
No on the stock boots.
I am selling my 1984 FJ600 carbs that I have set up to run with pods. It comes with the intake boots, no clamps. I only found 2 of the 4 filters...
It is set up with GP shift, same oil, cable is fine, clutch plates are flat.
No linkage. I think it is shifting forks.
What transmission components are likely to be bad? It is hard to find neutral after rebuild on a FJ600?
what is your email address?
How bout $40 plus shipping? Weight may effect price depending if you want brake hub and sprocket assy.
Straight clean wheels with good bearings. 18" rear with brake hub and 19" front. Braced swing arm, upper and lower triple tree, headlight &...
I wonder how much weight that adds?
It have a Katana rear 17," wheel GS500 hub, Early FZR600 swinger.
[ATTACH]
[ATTACH] Radian swinger bolts right on.
Hey Kickaha, have you replaced your petcock with a non vacuum unit and if so where can I find one? Thanks.
Hey Ken, have you replaced your petcock with a non vacuum unit and if so where can I find one? Thanks.
Hey bud, have you replaced your petcock with a non vacuum unit and if so where can I find one? Thanks.
Thanks.
I have had success with tuning FJ600 carbs with pods. This video only shows aggressive acceleration but was civil in traffic as well. [MEDIA]
Keep it open so others can use this as a trouble shooting tool.
Was this issue resolved?
Using anti-seize may give you a false torque value.
Good.
No, the only thing original is the TCI.
No spark.
Great. How do you test them?
Any one have a spare working TCI for the 1988 Yamaha FZ600 or FJ600 I guess will work?
Motor is together, now will it start? Keep them fingers crossed.[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH]
I feel your pain.
You are proly right, I just cant dedicate that much time explaining and all the photos. But I did find out and photo the differences in the inside...
I'm going to set the cam timing.