Dan please send me an email. Wingover167@gmail.com Keith
Dustin check the part numbers on A OEM parts supplier and see if the numbers are the same. I would do it for you but internet is problematic for...
Scott, i do have some covers available. Apologies for the late response, I don't check the forums, spend more time on the Facebook pages. Keith
Dan, i do have some covers available. Apologies for the late response, I don't check the forums, spend more time on the Facebook pages. Keith
There are a bunch of left side covers on ebay etc. I did this because the right side is the one that gets lost. Keith
After a lot of work I managed to make the elusive throttle right side cover. XJ650 This is cast plastic not printed. 68.00 each do to cost of...
[ATTACH] Still around, been having some health issues so had to give up my Honda ST1300. Still messing around with the xj on occasion.
[ATTACH] Curious if there is interest in air compressor caster mounts. I have had this on my compressors for a few years and find it handy....
found some other short video/s testing some formats. The videos are old and the project is much more detailed now and there is way more of the...
To answer some questions Mad_Bohemian Yes I am reverse engineering the bike from parts, No data from Yamaha. So if you have experience doing...
Hay guys I am still here…. It’s been an insane a difficult 2013 winter and crazy busy summer, haven’t been able to work on the XJ3D...
This is what I see, an expertly designed gunk trap. FlyGp [img]
rocs82650 You are absolutely correct about the diagonal oil port angle, thanks for pointing this out. I just checked the head I used for...
rocs82650 If I have this drawing correct this is a cutaway of the area I think you are asking about, it is the oil feed to the camshafts "750...
My reluctance to powder coat or paint the carburetors is echoed in the comments of others. My concern is future harsh chemical cleanings altering...
The first photo is a before and after shot of the bead blasted carburetors. Still haven’t selected how to protect the finish yet, Thanks for the...
Recently someone posted that they abrasive blasted there carburetors with a combination of soda and glass bead. The combination resulted in final...
It was a productive week on the project; I nearly finished the complete carburetor rack. Below is a test rendering, if you see any errors let me...
Re: Number 4 is alive Very observant, yes there are three holes in the pilot circuit. The hole that the pilot needle interfaces with and two...
Re: Number 4 is alive Power is out at our house do to the winter storm. I will respond and provide more information about the video when power is...
Number 4 is alive Click on the picture to play the video….(copyright FlyGp3D 2012) This is a non-rendered screen grab so quality is low, but...
Carb bowl drain screw ports (single or dual) So Hog fiddles and I were talking about the differences in the float bowl castings, one drain port...
Let me know if this helps, click on the picture to play the video. If you have more questions we could possibly do a Webex meeting. [img]...
Maybe a sign of damaged brain cells Gang this is a photo if a Y-10 needle notice the three washers placed between the plastic needle holder and...
Thought I would provide another update on the project, the new rendering is of a Hitachi carb body. I need to thank Chacal (XJ4Ever supporting...
Welcome and thanks for posting the photos FlyGp
Biggs Remarkable side shot photo, thanks for sharing the photo and video. FlyGp
Gang: I have created a windows 7 background theme that contains some of the test renderings from the XJ-3D project. The test renderings are used...
Fitz I like your diagram but am somewhat skeptical about the advantages of the YICS. Looking at the air path within the system has me...
Added this trinket to the completed 3D models list. The Petcock model was the project over the weekend. quite an interesting collection of parts...
Well I am still in traveling mode so I can only work on small portable parts. Winter is on approach so shop time should open up soon allowing...
This is the inside of my assembly, Red with white stripe connect to the off/run/off switch Black is the ground that is under the screw that...
Kudoskum I am hoping to use this work to someday help others fix their bikes and keep so many machines from needlessly hitting the parting out...
Re: struggle to make progress on the project Completed the cylinders this week, the lower castings are next. Enjoy the nice jugs FlyGp [img]
Occasionally I will set up a webex meeting to talk about and view on your PC the XJ3D project, anyone interested? I will attempt to setup a...
One thought, were the wheel bearings changed? If the internal spacer (red in the picture) was left out the force on the speedo side bearing could...
Maybe this will help; this is the XJ650 cutaway. From the right I have The castle nut, Washer, fork, speedo housing, bearing, wheel hub…....
Re: struggle to make progress on the project After another 10hr of work the head casting is getting closer to a presentable model. For validation...
Re: struggle to make progress on the project You know me well my friend…Click the picture [img] FlyGp
FlyGp here: It’s been a struggle to make progress on the project over the past few months do to summer travel requirements but I managed to...
I am working on the major engine castings and have a question about the level of detail required to represent the cast parts. For example on the...
Re: Parts are starting to fit into place (XJ3D Project) 4-1- The rendering is not fully timed yet, just a pretty picture, I think the #1 cam...
Parts are starting to fit into place. I finished the crankshaft today along with a few other small parts including the self-destructing primary...
Re: Just another update on the 3D project for 3/4/2012 I had a productive weekend working on the starter clutch model. The clutch is quite the...
The lines flow nicely, excellent use of components to pull a look together. Thanks for sharing the photos FlyGp
Re: Just another update on the 3D project for 3/4/2012 I managed to make some progress on the gearbox modeling. The middle gear anti-shock drive...
How similar is this switch to the 1982 650 maxim? If it is the same we can do a webex and look at the 3D model FlyGp