1. Some members were not receiving emails sent from XJbikes.com. For example: "Forgot your password?" function to reset your password would not send email to some members. I believe this has been resolved now. Please use "Contact Us" form (see page footer link) if you still have email issues. SnoSheriff

    Hello Guest. You have limited privileges and you can't "SEARCH" the forums. Please "Log In" or "Sign Up" for additional functionality. Click HERE to proceed.

4x 100ml Bleeder Syringe Holder

Discussion in 'XJ 3D Printing & STL Files' started by Oblivion, Sep 4, 2022.

  1. Oblivion

    Oblivion Active Member

    Messages:
    826
    Likes Received:
    139
    Trophy Points:
    43
    Location:
    Northeast Illinois
    I bashed up this bad johnny to hold my bleeding syringes at the same level and this way can be used as a syringe or funnel (open-topped). Can be used 2x or 4x. There's a loop in the middle that fits a wire coat hanger well. Later on, I can spin out a 2x version. I modeled this in ShetchUp with 100ml (40mm diameter) syringes.

    PXL_20220904_174838960.MP.jpg PXL_20220904_174922739.jpg
     

    Attached Files:

  2. Oblivion

    Oblivion Active Member

    Messages:
    826
    Likes Received:
    139
    Trophy Points:
    43
    Location:
    Northeast Illinois
    Here's an updated .zip with both 2x and 4x versions.
     

    Attached Files:

Share This Page