1. Some members were not receiving emails sent from XJbikes.com. For example: "Forgot your password?" function to reset your password would not send email to some members. I believe this has been resolved now. Please use "Contact Us" form (see page footer link) if you still have email issues. SnoSheriff

    Hello Guest. You have limited privileges and you can't "SEARCH" the forums. Please "Log In" or "Sign Up" for additional functionality. Click HERE to proceed.

82 750 Seca auxilliary headlight

Discussion in 'XJ Technical Chat' started by popeye47, Aug 6, 2010.

  1. popeye47

    popeye47 New Member

    Messages:
    18
    Likes Received:
    0
    Trophy Points:
    1
    Location:
    Vancouver Canada
    The auxilliary headlight is not working, I checked the bulb out and it looked ok but changed it anyway still nothing, any ideas please.
     
    popeye47, Aug 6, 2010
    #1
  2. stereomind

    stereomind Active Member

    Messages:
    1,440
    Likes Received:
    6
    Trophy Points:
    38
    Location:
    Tulsa, OK
    check continuity through the switch... Mine needed cleaning, and got so hot that when I turned it on, one of the wires de-soldered itself.
     
    stereomind, Aug 6, 2010
    #2
  3. KrS14

    KrS14 Active Member

    Messages:
    1,642
    Likes Received:
    9
    Trophy Points:
    38
    Location:
    St Marys, Ontario
    I agree with Stereo, The wires for mine had all been redone when i got it, bypassing the switch so it was always on. I fixed it up so it went through the switch again.

    Must have got hot at one point and the PO Macgyvered it.
     
    KrS14, Aug 6, 2010
    #3
  4. popeye47

    popeye47 New Member

    Messages:
    18
    Likes Received:
    0
    Trophy Points:
    1
    Location:
    Vancouver Canada
    Cleaning the switch worked. Thanks
     
    popeye47, Aug 6, 2010
    #4

Share This Page