1. Some members were not receiving emails sent from XJbikes.com. For example: "Forgot your password?" function to reset your password would not send email to some members. I believe this has been resolved now. Please use "Contact Us" form (see page footer link) if you still have email issues. SnoSheriff

    Hello Guest. You have limited privileges and you can't "SEARCH" the forums. Please "Log In" or "Sign Up" for additional functionality. Click HERE to proceed.

86 Maxim x generator trouble

Discussion in 'XJ Technical Chat' started by Maxim3, Jul 5, 2024.

  1. Maxim3

    Maxim3 New Member

    Messages:
    8
    Likes Received:
    0
    Trophy Points:
    1
    Location:
    Moore, OK, U.S.A.
    Hello all.
    I have replaced regulator/rectifier and generator brushes and replaced stator jack (3 white wires) with three single m/f connectors and red wire of rectifier connected separately of main jack (chassis side of connection was melted, pushing new male terminal out of connector). Will start and run but not putting out more than 12.5 volts. Checked as voltage out of generator and it's under 300 millivolts! Stator "legs" each measure above .4 ohm but below 1 ohm. Is stator my problem?
    Also, oddly, to me, the new brushes were almost exactly same length as old brushes. Assuming, uh oh, that old brushes were worn, I expected new ones to be longer.
     
    Maxim3, Jul 5, 2024
    #1

Share This Page