1. Some members were not receiving emails sent from XJbikes.com. For example: "Forgot your password?" function to reset your password would not send email to some members. I believe this has been resolved now. Please use "Contact Us" form (see page footer link) if you still have email issues. SnoSheriff

    Hello Guest. You have limited privileges and you can't "SEARCH" the forums. Please "Log In" or "Sign Up" for additional functionality. Click HERE to proceed.

Carb body and parts cleaning using ultrasonic cleaner

Discussion in 'XJ Technical Chat' started by HeckticHaze, May 24, 2014.

  1. HeckticHaze

    HeckticHaze Member

    Messages:
    131
    Likes Received:
    0
    Trophy Points:
    16
    Location:
    Upstate New York
    Well a broke down and purchased a Lyman ultrasonic cleaner. I purchased there concentrated wash for steel, stainless, and stated anodized aluminum at a more diluted level. This wash has worked real well on any of the steel parts. Should I be concerned if I use it on the Carb body or float bowl with the brass plugs or jet in the float bowl? Lyman makes a wash for brass and copper (can't use it on steel). Has anyone used this to clean the emulsion tubes or brass jets? Just trying to get some feedback from anyone using these ultrasonic cleaners.
     
    HeckticHaze, May 24, 2014
    #1

Share This Page