1. Some members were not receiving emails sent from XJbikes.com. For example: "Forgot your password?" function to reset your password would not send email to some members. I believe this has been resolved now. Please use "Contact Us" form (see page footer link) if you still have email issues. SnoSheriff

    Hello Guest. You have limited privileges and you can't "SEARCH" the forums. Please "Log In" or "Sign Up" for additional functionality. Click HERE to proceed.

De-Midnight Carbs

Discussion in 'XJ Technical Chat' started by vashtsdaytona, Mar 25, 2019.

  1. vashtsdaytona

    vashtsdaytona Active Member

    Messages:
    328
    Likes Received:
    50
    Trophy Points:
    28
    Location:
    Fargo
    I got a really good deal on a set of xj750 carbs. Small issue they are midnight carbs and are black.

    The slide covers are far from gold so these aren't immaculate.

    But I don't want black carbs.

    Suggestions on removing the paint? the whole kit and caboodle is coming apart either way.

    Or does someone want to trade me an afternoon set for a midnight" Paint on the bodies is all there, there are scrapes on the bowls where screw drivers have hit.
     
    vashtsdaytona, Mar 25, 2019
    #1
  2. Chitwood

    Chitwood Well-Known Member

    Messages:
    866
    Likes Received:
    375
    Trophy Points:
    63
    Location:
    Fort Atkinson, Wisconsin
    I'll have to take a look at my 750 midnight. I dont remember if the carbs are black on it or not as it's not the most original. I'll take a look when I can and let you know. Might be able to do a swap but it's just been so darn long since I've looked at it
     
    Chitwood, Mar 25, 2019
    #2
  3. Door dude

    Door dude Active Member Premium Member

    Messages:
    458
    Likes Received:
    91
    Trophy Points:
    28
    Location:
    Mountain Home Arkansas
    I bought a gal. of gunk carburetor parts cleaner complete kit it includes parts basket. I broke the carbs apart and removed all of the parts. I dipped each carb in the can for about 1/2 hour. Then with a small brush and warm soapy water brush away all of the melted paint. Safety glasses and gloves are a must, this stuff can hurt you.
     
    Door dude, Mar 25, 2019
    #3
  4. XJ550H

    XJ550H Well-Known Member Premium Member

    Messages:
    13,199
    Likes Received:
    3,862
    Trophy Points:
    113
    Location:
    Great North Woods
    brake fluid may remove the paint a little less harsh than gunk
     
    XJ550H, Mar 25, 2019
    #4

Share This Page