1. Some members were not receiving emails sent from XJbikes.com. For example: "Forgot your password?" function to reset your password would not send email to some members. I believe this has been resolved now. Please use "Contact Us" form (see page footer link) if you still have email issues. SnoSheriff

    Hello Guest. You have limited privileges and you can't "SEARCH" the forums. Please "Log In" or "Sign Up" for additional functionality. Click HERE to proceed.

Electronic signal flasher???

Discussion in 'XJ Modifications' started by wonderdawg, Jul 6, 2010.

  1. wonderdawg

    wonderdawg Member

    Messages:
    60
    Likes Received:
    0
    Trophy Points:
    6
    Location:
    So. California
    I know that I have read about such a device, I am just looking for any and all information that I can find about one. I want to run my turn signal with LEDs and I thought that I needed to use an electronic flasher to make them flash. Is that correct? If so, then what kind of flasher do I need?

    Regards,

    W. D. :wink:
     
    wonderdawg, Jul 6, 2010
    #1
  2. mlew

    mlew Well-Known Member

    Messages:
    3,090
    Likes Received:
    241
    Trophy Points:
    63
    Location:
    Apex, NC
    Look at your local auto parts store, most of them have them. If you change all your lights to LED they may not work. They require at least one regular bulb to operate or a resistor. Search online there are electronic flashers that are made for all LED setups. Remember you will lost the autocancel function unless you modify the flasher.
     
    mlew, Jul 6, 2010
    #2
  3. wonderdawg

    wonderdawg Member

    Messages:
    60
    Likes Received:
    0
    Trophy Points:
    6
    Location:
    So. California
    What sort of modification might be necessary to the electronic flasher so that the autocancel continued to work??? :p

    Regards,

    W. Foley
     
    wonderdawg, Jul 6, 2010
    #3
  4. nickel98!

    nickel98! Member

    Messages:
    50
    Likes Received:
    0
    Trophy Points:
    6
    Location:
    Houston, Texas
    Check this Post

    It will tell you what you need and how to wire it up.
     
    nickel98!, Jul 7, 2010
    #4
  5. wonderdawg

    wonderdawg Member

    Messages:
    60
    Likes Received:
    0
    Trophy Points:
    6
    Location:
    So. California
    Thank you very much for the information and the links. I really do appreciate it. I will have to follow up with Paul to learn more about how his project went for conversion on all the fronts he was working on. So again thank you very much this will be very helpful.

    Regards,

    W. D.
     
    wonderdawg, Jul 8, 2010
    #5

Share This Page