1. Some members were not receiving emails sent from XJbikes.com. For example: "Forgot your password?" function to reset your password would not send email to some members. I believe this has been resolved now. Please use "Contact Us" form (see page footer link) if you still have email issues. SnoSheriff

    Hello Guest. You have limited privileges and you can't "SEARCH" the forums. Please "Log In" or "Sign Up" for additional functionality. Click HERE to proceed.

I've got a CBR F3 master cylinder, now I need lines...

Discussion in 'XJ Technical Chat' started by ryanismyname, Dec 28, 2009.

  1. ryanismyname

    ryanismyname Member

    Messages:
    49
    Likes Received:
    0
    Trophy Points:
    6
    Location:
    Baltimore, MD
    I want to get rid of the splitter and just run two lines off the MC. Can someone who has done this on a Seca 750 tell me the length of brakeline I will need? And where can I get that double banjo bolt?

    Also, the CBR F3 weighs about 100 lbs less than the Seca. Is bolting on an MC designed for a bike that much lighter going to hurt the braking/pumping ability?
     
    ryanismyname, Dec 28, 2009
    #1
  2. Polock

    Polock Well-Known Member

    Messages:
    9,751
    Likes Received:
    2,097
    Trophy Points:
    113
    Location:
    Beaver Falls, PA
    Z1
    use a plastic hose to measure, it bends like the brake line will, subtract for the fittings
    i don't know what size threads the honda MC has but the right size for it
    the yamaha calipers should be 10X1.25
    my gsxr MC works fine, weight isn't a problem
     
    Polock, Dec 28, 2009
    #2
  3. ryanismyname

    ryanismyname Member

    Messages:
    49
    Likes Received:
    0
    Trophy Points:
    6
    Location:
    Baltimore, MD
    That's a lot cheaper than I expected. Thanks a lot!
     
    ryanismyname, Dec 28, 2009
    #3
  4. bigfitz52

    bigfitz52 Well-Known Member Premium Member

    Messages:
    21,283
    Likes Received:
    419
    Trophy Points:
    83
    Location:
    Rural SE Michigan 60 miles N of Motown
    Those aren't stainless for that price are they?
     
    bigfitz52, Dec 29, 2009
    #4
  5. ryanismyname

    ryanismyname Member

    Messages:
    49
    Likes Received:
    0
    Trophy Points:
    6
    Location:
    Baltimore, MD
    Stainless ones are further back in the pages, but are only a buck or two more.
     
    ryanismyname, Dec 29, 2009
    #5
  6. Polock

    Polock Well-Known Member

    Messages:
    9,751
    Likes Received:
    2,097
    Trophy Points:
    113
    Location:
    Beaver Falls, PA
    i found the boxes, ones 10330 and the others 10332
    30 and 32 inch but best measure yours and see what you think
    103 series are stainless with black shield
     
    Polock, Dec 29, 2009
    #6

Share This Page