1. Some members were not receiving emails sent from XJbikes.com. For example: "Forgot your password?" function to reset your password would not send email to some members. I believe this has been resolved now. Please use "Contact Us" form (see page footer link) if you still have email issues. SnoSheriff

    Hello Guest. You have limited privileges and you can't "SEARCH" the forums. Please "Log In" or "Sign Up" for additional functionality. Click HERE to proceed.

Maintence

Discussion in 'XJ Modifications' started by T-type, May 5, 2012.

  1. T-type

    T-type New Member

    Messages:
    23
    Likes Received:
    0
    Trophy Points:
    1
    For some reason I keep searching and can't find any info on regular maintence on my 1980 yamaha maxim 650. Mainly looking for what fluids are recomended and how much.
    Shaft Fluid
    Engine/Tran Fluid
    Front Fork Fluid
    Brake Fluid
    Any more?

    Thanks!
     
    T-type, May 5, 2012
    #1
  2. bigfitz52

    bigfitz52 Well-Known Member Premium Member

    Messages:
    21,283
    Likes Received:
    418
    Trophy Points:
    83
    Location:
    Rural SE Michigan 60 miles N of Motown
    Engine oil: Motorcycle specific conventional 20W50 (or 10W30 when it's cold out.) NO CAR OIL and avoid synthetics.

    Forks: Fork oil of your choice; 10W is factory recommended but you'll probably find 15W more to your liking.

    Brake fluid: DOT 3.

    Final drive "pumpkin" SAE80 API GL4 Hypoid gear oil.

    All of this is covered in the service manual that you are going to need.

    Valve clearances need regular attention; your thirty year old brakes and clutch will demand it soon.

    Hopefully you've visually inspected your rear brake shoes for the signs of delamination. READ: http://xjbikes.com/Forums/viewtopic/t=15874.html
     
    bigfitz52, May 5, 2012
    #2

Share This Page