Wanted Valve shims

Need four 270's and two 255's.

Will have two 280's and three 275's left over.

 

I think @hogfiddles runs a shim pool. Swap n save! Start a convo with him, or wait for him to chime in here. He's like Betelgeuse, just say his name 3 times and he'll appear!

Btw, how did the insurance thing go? I assume reasonably well, if you're still maintaining the engine!

 

I have 2 @270 and 2 at 255
also 2@2725 bmw shims
what were your clearances and shims you are replacing of the valves that needed the 270s the bmw 2725s may work for you

will swap for the shims you do not need

 

I sent him a message, thanks! Looks like he has the shims I need, too

And the insurance stuff all worked out finally, thanks for asking! I got to keep my bike, and they gave me the value I asked for it. Indiana also requires reimbursement for an "equivalent" rental, whether you got one or not, so I got that, too. I did have to find all the Indiana codes for them to prove it, but after that things went pretty smoothly

 

All the 270's are replacing 275's. The BMW 2725's would barely bring them in spec. That's really cool they do smaller increments like that though. I have a couple adjustments that would be great for, 2 intake valves right at 0.06. The recommended shim would only bring the clearance to the minimum 0.11, but the next size would bring it just outside maximum to 0.16.

Hogfiddles does have the shims I need, but if you need my old shims let me know.