1. Some members were not receiving emails sent from XJbikes.com. For example: "Forgot your password?" function to reset your password would not send email to some members. I believe this has been resolved now. Please use "Contact Us" form (see page footer link) if you still have email issues. SnoSheriff

    Hello Guest. You have limited privileges and you can't "SEARCH" the forums. Please "Log In" or "Sign Up" for additional functionality. Click HERE to proceed.

XJ Alternator Port Blanking Cover

Discussion in 'XJ 3D Printing & STL Files' started by Dan Gardner, Apr 20, 2022.

  1. Dan Gardner

    Dan Gardner Well-Known Member Premium Member

    Messages:
    1,411
    Likes Received:
    689
    Trophy Points:
    113
    Location:
    Minneapolis, MN
    This is a little cover to close off the alternator when the wires are out of it.

    Built and tested on an XJ650RJ. The stator assembly that includes the gasket for the alternator wiring pass-through is pretty common for the 650, 700, 750, and 900, so there's a good chance it will work on those.

    Designed using FreeCAD. Printed on FlashForge Creator Pro. File types included in zip: FCStd, stl, x3d.

    20220420_021424578_iOS.jpg

    20220420_021316897_iOS.jpg



    THE FILES ARE PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
     

    Attached Files:

    Dan Gardner, Apr 20, 2022
    #1

Share This Page