1. Some members were not receiving emails sent from XJbikes.com. For example: "Forgot your password?" function to reset your password would not send email to some members. I believe this has been resolved now. Please use "Contact Us" form (see page footer link) if you still have email issues. SnoSheriff

    Hello Guest. You have limited privileges and you can't "SEARCH" the forums. Please "Log In" or "Sign Up" for additional functionality. Click HERE to proceed.

XJ Starter Block Plug

Discussion in 'XJ 3D Printing & STL Files' started by Dan Gardner, Apr 18, 2022.

  1. Dan Gardner

    Dan Gardner Well-Known Member Premium Member

    Messages:
    1,436
    Likes Received:
    696
    Trophy Points:
    113
    Location:
    Minneapolis, MN
    This little gadget fits into the hole in the block where the starter goes. This is useful when cleaning/painting the engine or plugging for long term storage.

    It fits nice and snug, but would probably not be water tight without some tape.

    If somebody were a wiz, you could add a channel around the plug to put an o-ring just like the starter has.

    There are recesses on the face so that it can be gripped with a pliers and removed.

    Designed using FreeCAD. Printed on FlashForge Creator Pro. File types included in zip: FCStd, stl, x3d.

    20220418_234634521_iOS.jpg 20220418_234654082_iOS.jpg

    THE FILES ARE PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
     

    Attached Files:

    Last edited: Apr 19, 2022
    chacal likes this.

Share This Page