1. Some members were not receiving emails sent from XJbikes.com. For example: "Forgot your password?" function to reset your password would not send email to some members. I believe this has been resolved now. Please use "Contact Us" form (see page footer link) if you still have email issues. SnoSheriff

    Hello Guest. You have limited privileges and you can't "SEARCH" the forums. Please "Log In" or "Sign Up" for additional functionality. Click HERE to proceed.

XJ650 Maxim measurement please

Discussion in 'XJ Technical Chat' started by MiCarl, Feb 25, 2009.

  1. MiCarl

    MiCarl Active Member

    Messages:
    4,373
    Likes Received:
    23
    Trophy Points:
    38
    Location:
    Livonia, MI (Metro Detroit)
    I need a rough measurement between the mounting points on a 650 Maxim headlight bucket. I'm referring to the two holes that the bucket mounts to the yolk with.

    If someone would grab that I'd appreciate the number.

    Thanks.
     
  2. greggvickrey

    greggvickrey Member

    Messages:
    324
    Likes Received:
    3
    Trophy Points:
    18
    Location:
    Smyrna, Tn
    MiCarl, if you are talking about where the bucket pivots on the mounting bracket, it is approx 8" on my 650. Hope this helps.

    Gregg
     
  3. bigfitz52

    bigfitz52 Well-Known Member Premium Member

    Messages:
    21,283
    Likes Received:
    419
    Trophy Points:
    83
    Location:
    Rural SE Michigan 60 miles N of Motown
    Ha! I thought so. I'll bet everything with a 7" light is going to be close. I went out and measured a 550 Seca bucket by shoving a tape measure thru it and going to the outside of the rubbers and got just under 8 1/4."
     
  4. MiCarl

    MiCarl Active Member

    Messages:
    4,373
    Likes Received:
    23
    Trophy Points:
    38
    Location:
    Livonia, MI (Metro Detroit)
    Thank you gentlemen.
     

Share This Page