ebay 284164917996 are the same i used but got mine from the uk looks like you can only get them from china now
I have a cheap pair (£5 on ebay) i put on my xj750 in the winter.They fit using the exsisting lever bolts and some washers.They work well, i put...
1940 bsa wdm20 500cc 1960 ariel arrow 250cc 1967 bsa bantam 175cc 1976 triumph bonny 750cc
fitted hand guards to my maxim using clutch and brake pivot bolts but you need to change bolts for longer ones.got the guards of ebay for 4...
had the same problem on my maxim when i had the wheel out.i turned the spacer on the axle the other way round and all good.
have used this twice on tanks and it sets as hard as iron.once you have opened the tin and put lid on to save some if any left it sets solid.
went through and cleaned connectors again and now light goes off and stays off,although not been out for a run yet.
had the same hard to start when been standing and cold.i went thru all the electrical connectors and cleaned with electrical cleaner and worked in...
update,have been out on the bike three times since ,battery seems fine but the battery warning light stays on all the time (resistor fitted see above)
update,checked all above.battery level was low on 2 of the cells and filled with distilled water,only checked battery a couple of months ago.on...
thanks,will check all that and report back
went out for first run since last year,about 50 miles, for the last couple of miles the battery warning light came on.have a resistor fitted {see...
thanks for that.sorry to jump on this thread but i am not able to post a new thread.or might be just a senior moment.
i am fitting new coils that need spade terminals fitting to the wires.does it matter which wire goes to which connector as they are not marked + or -
update.went through all the wire connectors on the ignition system and cleaned them up with contact cleaner.that was 8 days ago and today tried...