Exactly. Gary H.
Did a Ohm test reveal this? Gary H.
Welcome aboard. Did you clean the carburetors? Gary H.
Welcome aboard. There's a write-up in "The Information Overload" thread regarding pod filters and possible jet sizes on xj bikes. Click on the...
@JCH & Mukhtar, If you've checked all things suggested by members in this thread the only thing I can think of right now is the float needles. If...
There should be a ground strap on the back of the engine that connects to the f rame. If it's there make sure it is making good contact. If it's...
Actually I did this over the weekend... Dusted it off, did a quick carb cleanup, charged the battery, dumped the oil and took it for a spin around...
Whatever tool you use (i suggest a Allen wrench) to remove the screws should be held straight into the Allen head. Any angles or side to side...
+1. Gary H.
Thanks Chacal. Yeah, I'm thinking kind of what Franz also suggested but cut closer to the threads then collapse the pieces out with pliers. Gary H.
You may need to get a hold of a hack saw blade. Grind or flat file the non-cutting edge so it will fit in the hole. Relief cut the plug in four...
The jet needle is Y-10. Gary H.