Discussion in 'XJ Modifications' started by Xjrider92117, Feb 12, 2018.
get a bolt drill a hole in it the same size as the barrel slot the bolt across the end deep enough to hold cable put a rod on hole in bolt(drill bit works)
flux cable as shown melt down cable end into hole cool and tap rod to drive fixed end out clean it up and it is like new.
i saw it on youtube
will fail just like a new cable at the cable when it frays
That is a very creative way of accomplishing this task!
that guy is going to get someone hurt
Ichiban does satire, and only satire. None of his advice is meant to be taken seriously.
Yeah I wouldn't use a bullet. Every old tackle box has some lead in it.