XJ750RL To R Conversion Question

Hello, made an account just because i think im a bit hooped and need some answers.

I have a 1982 yamaha XJ750RL with that stock yamaha front ferring that i want to butcher and convert into a 750R with just that square headlight out front. Now heres my issue, i have a 750r front square headlight assembly that i got off of ebay but my connector is this 9 pin connector that i somehow need to plug into that h4(?) bulb.

I have a Tech Manual that i got from a buddy but i cannot find that 9 pin connector in any of the diagrams. want i dont want to do it pry open that ferring ruin it just to get that 9 pin to three prong connector that must be in there.

Does anyone know where i can get that 9 pin to 3 prong connector?

 

Is it the Vetter-standard(*) 9-pin plug? Some info here with a link to a wiring guide: http://kz900.com/vetter_accessories.htm

Or maybe this will help?
http://www.xs11.com/forum/showthread.php?t=31638
Or this?
http://www.xs11.com/xs11-info/tech-...talling-a-used-vetter-windjammer-fairing.html

I've found fairings are a big rabbit hole.

* May or may not be a Molex connector. I don't have time to confirm right now, but saw some suggestions that was so.

HTH

 

This photo shows what was inside my factory fairing. You can see where the bundle of wires comes from the connector and the three-pin female connector for the headlight.

 

yes all of this should help a lot, its more then ive found online so far so thanks guys ill take a look tonight.

<3